Strong Industrial Sewing Thread – How Strength Is Measured and Which Threads Withstand Load

Polkom · 4 min read
Strong Industrial Sewing Thread – How Strength Is Measured and Which Threads Withstand Load

Strong sewing threads, often called industrial thread, are threads with high breaking strength and good abrasion resistance – most often made of continuous polyester filament, polyamide 6.6, bonded nylon, core-spun polyester or aramid. Strength is measured as breaking force in centinewtons (cN) in a standardised tensile test. The choice depends on the thread thickness, its construction and how much load the seam will carry.

How thread strength is measured

Thread manufacturers describe strength with several values. They are measured in a tensile test, in which a length of thread is stretched at a constant speed until it breaks. The method for a single yarn is described in the ISO 2062 standard.

  • Breaking strength (cN) – the force at which the thread breaks. The higher the number, the stronger the thread at the same thickness.
  • Tenacity (cN/tex) – strength divided by linear density. It allows threads of different thicknesses to be compared and reflects the quality of the raw material.
  • Elongation at break (%) – how far the thread stretches before it breaks. Low elongation means a stable seam; higher elongation helps with knitwear and stretch fabrics.
  • Abrasion resistance – how many rubbing cycles the thread survives. On products that rub at corners and edges, it matters as much as strength itself.

Thickness: tex, Nm and ticket number

A thicker thread is stronger, so strength should always be compared at equal thickness. Thickness is expressed in tex (grams per 1000 metres), in the metric count Nm or by the ticket number on the cone label. With tex, a higher number means a thicker thread; with ticket, a finer one. A detailed explanation and a conversion table can be found in the article thread sizes – tex, ticket and Nm.

Which threads are strongest – raw material and construction

Continuous polyester filament

This thread is twisted from endless polyester filaments, with no short fibres. It offers the highest strength for a given thickness, low elongation and a smooth surface. It suits bags, backpacks, footwear, furniture, awnings and safety harnesses.

Bonded polyamide 6.6 and polyester

The filaments are coated with a resin that binds them into a single strand. The thread does not fray when sewing through thick materials, heats up less in the needle and withstands heavy abrasion. It is the classic choice for leather goods, upholstery, footwear and saddlery.

Core-spun polyester

A core of high-tenacity filament is wrapped in staple fibres. The core provides strength, while the wrap gives a matt look, good machine performance and resistance to higher sewing temperatures. It is widely used for denim and workwear.

Aramid threads

Meta- and para-aramid threads keep their strength at high temperatures and do not support combustion. They are used for protective clothing, gloves and technical filters, where flame resistance is required alongside strength.

Cotton threads are weaker than synthetic ones at the same thickness, but they have their own advantages in dyeing and ironing. We have compared the two in the article cotton or polyester threads.

Strong sewing threads by product

ProductSeam loadSuitable thread
Jeans and workweartension, abrasion, industrial launderingcore-spun polyester, filament for decorative topstitching
Bags and backpacksweight on the handles, corners, zipscontinuous polyester or bonded nylon, in a heavier size
Leather belts and walletsabrasion, visible stitchingbonded polyamide or polyester
Awnings, sunshades, tentswind, sun, moisturehigh-tenacity polyester with UV stabilisation
Upholstery and furnituretension when sitting, frictionbonded polyamide 6.6 or filament polyester
Protective clothingheat, flamearamid threads

For outdoor products, see also our technical threads, and for garments and home textiles, our sewing threads.

A seam is as strong as the thread, needle and stitch together

A strong thread does not guarantee a strong seam if the other parameters are not matched to it. The needle must suit the thread thickness: an eye that is too narrow rubs and heats the thread, while a needle that is too thick leaves large holes in the material. Stitch density matters too – more stitches per centimetre increase seam strength, but on leather and dense fabrics an overly tight stitch perforates the material and weakens it. The stitch type changes the result: a chain stitch is more elastic, while a lockstitch is more stable and does not unravel when a single loop breaks. Upper and lower thread tension must be balanced so the thread does not break on one side.

Common mistakes when choosing a strong thread

  • comparing the strength of threads of different thicknesses without looking at tex;
  • choosing a thicker thread without changing the needle and the machine settings;
  • sewing outdoor products with thread that has no UV stabilisation – the thread loses strength and fades before the fabric wears out;
  • sewing leather with uncoated thread that frays at the thick sections;
  • skipping the test – a sample on the real material tells you more than any specification.

Threads for heavy-duty seams from Polkom

Polkom is a manufacturer of accessories for fashion, footwear and bags, for perfumes and cosmetics, packaging and furniture, with its own production in Sofia and over 30 years of experience. In the threads category you will find sewing, technical and functional threads with shade cards. We help you match thread, needle and finish, and send samples when needed. Our products carry OEKO-TEX® certification, and recycled versions are available on inquiry. Describe your product and material via the contact page.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Which sewing thread is the strongest?
At equal thickness, threads made of continuous polyester filament and polyamide 6.6 have the highest breaking strength, especially in a bonded version. Aramid threads are also very strong and additionally withstand high temperatures. The choice between them depends on the product – bonded nylon is preferred for leather and upholstery, and UV-stabilised polyester for awnings.
What does breaking strength in cN mean?
Breaking strength is the force at which the thread breaks in a tensile test, expressed in centinewtons. One hundred centinewtons is roughly the weight force of one hundred grams. The value should always be compared at equal thread thickness, which is why tenacity in cN/tex is more useful for comparison, as it reflects the quality of the raw material.
Is a thicker thread stronger?
With the same raw material and construction, a thicker thread withstands greater force. However, it needs a thicker needle and makes larger holes, which on fine fabrics and leather can weaken the material around the seam. So the better choice is often a stronger construction, such as filament or bonded thread, rather than simply a heavier size.
What thread should I use for sewing bags?
Bags and backpacks are sewn with continuous polyester or bonded nylon thread in a heavier size than for clothing. These threads carry the weight on the handles and resist abrasion at the corners. For leather bags, coated bonded thread is preferred, because it does not fray when sewing through several layers of leather and interlining.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.