Wall Hooks and Coat Racks – Types, Materials and Fitting

Polkom · 4 min read

Wall hooks come as single or double hooks, rails with several hooks and wall coat racks with a shelf. The choice depends on the location – hallway, bathroom, hotel room, office or changing room – on how many garments they will carry and on the type of wall. Metal wall hooks made of zinc alloy or stainless steel, fitted with the right wall plugs, last for many years of daily use.

Here is how to choose the type, material and finish, and how to fit the hook so that it does not work loose.

Types of wall hooks

Single hooks

One hook with one hanging point – for a towel, bag, hat or keys. They are fitted on their own or in a row, with the spacing chosen freely. They suit bathrooms, children's rooms and small hallways.

Double hooks

Two hooks one above the other or side by side: the upper one for a coat, the lower one for a scarf or bag. The two hanging points let you put more items in one place without garments piling up on top of each other. A double hook makes better use of space and is a classic choice for hotels, offices and doors.

Hook rails and boards

A metal or wooden board with several hooks, mounted in one line. The advantage is that the hooks are perfectly aligned and the load is spread along the whole board and several fixing points. They are used in hallways, changing rooms, nurseries and restaurants.

Wall coat racks

A larger construction with hooks and a hat shelf, sometimes with room for shoes or a mirror. A wall coat rack organises the whole hallway and is practical where there is no space for a wardrobe.

Bathroom hooks

Hooks and holders for towels and bathrobes, most often made of stainless steel, which withstands moisture and steam. It is best for the hook to have a rounded end so that it does not snag the towelling.

Decorative hooks and hooks with logo

Hooks with ornaments, geometric shapes, a monogram or the logo of a hotel, restaurant or brand. They are part of the interior, not just a functional detail.

Materials and finishes

MaterialAdvantagesSuitable for
Zinc alloycasting of solid, decorative shapes with detailhallways, hotels, designer interiors
Stainless steelresistance to moisture and corrosionbathrooms, swimming pools, spas, kitchens
Powder-coated steelstrength in long constructions, any colourcoat racks, rails, changing rooms
Aluminiumlightness, modern lookoffices, shops, minimalist interiors

The finish determines the look and durability. The most popular are chrome, satin chrome, black, anthracite, gold, matt gold, bronze, antique brass and rose gold, as well as powder coating in any colour. Polkom metal wall hooks are nickel free. The full palette is on the Colours and finishes page.

Load capacity: what it depends on

How much weight a wall hook can hold depends on several factors together, not just on the hook itself:

  • The wall – concrete and solid brick hold best, plasterboard holds least.
  • The wall plug and screw – they must match the type of wall and the thickness of the base.
  • The number of fixing points – a hook with two or more screws works loose less.
  • The length of the hook – the further from the wall the garment hangs, the greater the leverage on the screws.
  • The way it is used – in a changing room or hotel hallway the hook is loaded and pulled many times every day.

For public venues, state in your enquiry the number of garments and how often the hooks are used, so that a suitable model can be selected.

Fitting wall hooks

Concrete and solid brick

Drill with a hammer drill and a masonry bit, clear the dust from the hole and use a nylon wall plug with a suitable screw. This is the most reliable base, even for heavy coat racks.

Hollow brick

Drill without hammer action so as not to break the cavities. Use long plugs for hollow materials that expand behind the brick wall.

Plasterboard

An ordinary wall plug will not hold. Use metal cavity wall anchors that spread behind the board, or fix the hook directly into the stud of the frame. For heavy coat racks, place a timber or plywood insert behind the plasterboard when the wall is built.

Wood and furniture

On doors, wardrobes and wooden panelling, wood screws are used, and the hole is pre-drilled with a thinner bit so that the material does not split.

General tips

  • Mark the holes using a template and check with a spirit level.
  • The standard height for adults is about 160–180 cm from the floor, lower for children.
  • Leave enough space between the hooks so that coats are not squashed together.
  • Tighten the screws, but not too much – in soft walls the plug can spin.

Hooks for hotels, restaurants and shops

When fitting out venues, it is important for all hooks to be the same type and finish and to match the handles, knobs and other metal details of the furniture. Models are made with a set number of hooks, length and colour, including with an engraved logo. See all furniture accessories to coordinate the whole interior. If you need hangers for the garment itself – hanging chains sewn into the collar – see the metal chains.

Wall hooks from Polkom

Polkom is a manufacturer of accessories for fashion, footwear and bags, for perfumes and cosmetics, packaging and furniture accessories, with over 30 years of experience. We manufacture wall hooks and coat racks in standard models and made to order – in any colour and with logo, with delivery across the EU. Send an enquiry with the number of hooks, the dimensions and the finish you want.

Share this article

FAQ

Frequently asked questions

Which wall hook should I choose for a small hallway?
In a narrow hallway, a board with several hooks or double hooks mounted in one line works best. They use the height without taking up floor space. If you only have room on one wall, choose a wall coat rack with a hat shelf. A slim profile and a colour in the tone of the wall make the hallway look more spacious.
Can a hook be fitted on bathroom tiles?
Yes, but drill carefully. Use a tile bit without hammer action, stick a little masking tape on the spot so that the bit does not slip, and drill away from the edge of the tile. Then switch to a masonry bit and insert a wall plug. For the bathroom, choose a stainless steel hook.
Can I order a hook with a hotel logo?
Yes. For hotels and restaurants, hooks are made with an engraved logo or monogram, in a specific shape, number of hooks and finish. That way the hook fits into the interior and the identity of the venue. Send the logo, the number of rooms and the finish you want to receive a design and a quote.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.