Washing Clothes with Zips – Caring for a YKK Moulded Zip So It Lasts

Polkom · 4 min read
Washing Clothes with Zips – Caring for a YKK Moulded Zip So It Lasts

When washing clothes with a zip, the most important things are that the zip is fully closed, the garment is turned inside out and it is not ironed directly on the teeth. This way a YKK Vislon moulded zip keeps its shape, does not snag other garments and the slider does not deform. If it sticks, the zip is cleaned and lightly lubricated, and if it splits behind the slider, it is usually the slider that is replaced, not the whole zip.

This article is useful for both brands and ateliers: the right care instructions reduce complaints, and knowing how to fix the most common problems saves unnecessary replacements.

Washing clothes with zips – basic rules

  1. Close the zip completely – open teeth snag other garments and the drum, and the tape can become distorted.
  2. Turn the garment inside out – the zip is protected and the outer side of the fabric does not rub against it.
  3. Follow the temperature on the label – the zip withstands normal programmes, but the tape and slider should not be exposed to unnecessary heat.
  4. Use a mild detergent – aggressive detergents and bleach can affect the colour of the tape.
  5. Do not overload the machine – excessive twisting puts strain on the zip.

Drying

Moulded teeth tolerate tumble drying at a moderate temperature, but very high temperatures over many cycles can deform the plastic or shrink the tape. If the product label allows it, dry on a low setting. The safest option is to dry the item on a hanger with the zip open, so that the tape also dries.

Ironing

Never iron directly on the teeth of a moulded zip – the iron can melt or deform them. If the area around the zip needs ironing, use a low temperature and a cloth between the iron and the fabric, and keep away from the chain.

The most common problems and their solutions

ProblemLikely causeSolution
The zip sticksdirt, salt, sand, caught fabriccleaning, light lubrication, freeing the fabric
It splits behind the sliderworn or spread sliderreplacing the slider
It does not close at the bottomthe pin is not fully inserted into the boxcorrect insertion, checking the pin
Missing or broken toothimpact or excessive loadreplacing the whole zip
The puller is brokenmechanical impactreplacing the puller or slider
The slider comes off the top endmissing top stopfitting a new top stop

The zip sticks – what to do

  • Check for caught fabric – the lining or placket often gets into the slider. Pull the slider back gently and free the fabric.
  • Clean the teeth – with a soft brush and warm water, especially after contact with salt, sand or mud.
  • Lubricate lightly – with wax, pencil graphite or a special zip lubricant. Apply to the teeth and run the slider back and forth several times.
  • Do not pull sharply – force can bend teeth or tear the tape.

The zip splits – replacing the slider

If the chain is intact but the zip opens behind the slider, the slider no longer presses the teeth together firmly enough. With moulded zips, the solution is to replace the slider with a new one of the same line and size. Temporary fixes such as squeezing the slider with pliers sometimes help briefly, but risk breaking the slider. In an atelier the replacement is quick, and on open-end zips the slider is inserted from the bottom end.

Care instructions for your customers

A brand can reduce complaints by giving short instructions on a label or hang tag:

  • “Close the zip before washing”;
  • “Wash inside out”;
  • “Do not iron on the zip”;
  • “If it sticks, clean the teeth and do not pull sharply”.

These instructions complement the ISO 3758 care symbols placed on care and composition labels.

Prevention in production

  • Choose a size large enough for the load – a small zip wears faster.
  • Leave enough distance between the seam and the teeth so that fabric does not get caught.
  • Add a zip garage and an inner placket on jackets.
  • Test the sample by washing according to the label programme.
  • Keep a small stock of spare sliders for repairs.

Off-season storage

Items with zips should be stored clean and dry, with the zip closed, on a hanger or folded without sharply bending the chain. If the zip is left open and the item is pressed under weight for months, the tape can deform and the slider may stick at the start of the season. For leather and mixed-material items, avoid plastic bags in which moisture collects. Before first wear, run the slider along the whole length several times and lubricate lightly if needed.

Specifics of outdoor and ski clothing

After the ski season, the zip has been in contact with snow, salt and often with reproofing agents. Recommend that customers rinse the area around the zip with warm water, let the item dry completely with the zip open and store it closed, but not compressed. When the jacket is reproofed, the lubricant on the teeth should be renewed.

YKK moulded zips and service through Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags. YKK is a third-party brand – we supply original YKK Vislon moulded zips and compatible sliders in Bulgaria and the EU. If the brand is not a requirement, also browse our standard moulded plastic zips. Send an inquiry for zips, spare sliders or advice.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

How do I lubricate a sticking moulded zip?
Clean the teeth with a soft brush and warm water and let the zip dry. Then apply a thin layer of wax, pencil graphite or a special zip lubricant to the teeth on both sides. Run the slider up and down several times. Avoid oils, which hold dust and can stain the fabric.
Why does the zip split after I close it?
Most often the slider is worn or spread and no longer presses the teeth together tightly. If the chain is intact, the problem is solved by replacing the slider with a new one of the same line and size. If teeth are missing or broken, the whole zip must be replaced. On an open-end zip, also check that the pin is fully inserted.
Can a garment with a moulded zip be tumble dried?
Yes, if the product label allows it. Moulded teeth tolerate drying at a moderate temperature, but repeated drying on a high setting can deform the plastic or shrink the tape. The safest option is drying at a low temperature or on a hanger. The zip should be closed during drum drying.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.