Zip Manufacturer – How to Choose and What to Check in the Samples

Polkom · 4 min read
Zip Manufacturer – How to Choose and What to Check in the Samples

A good zip manufacturer is recognised by its samples and its specification, not by its catalogue – and the same applies when you buy from a well-known zipper company such as YKK. Before a production order, ask for zips in the real size number, length and colour, check the sliding, the stops, the colour and the wash behaviour, and compare the result with a detailed technical specification. This way complaints are prevented before the first cut.

What to expect from a zip manufacturer

A zip is an assembled product: two tapes, a chain of teeth or a coil, a slider and stops. Its quality depends on how each element is selected and combined. It is reasonable to expect from your partner:

  • a clear designation of the type – metal, nylon coil, moulded-tooth or invisible – and of the size number;
  • colour to a shade card, Pantone or a fabric sample;
  • a choice of sliders – locking or non-locking, with different pulls, with a logo;
  • samples before the production run and consistent quality on repeat orders;
  • documents on material safety;
  • advice on which zip suits which product.

Sample tests – what to check

The sample is where you can easily catch a problem that would otherwise only show up in the shop. Carry out at least the following checks:

CheckHow it is doneWhat you are looking for
Slidingopen and close the zip many times, also at an anglesmooth movement without snagging
Stopspull the slider hard towards the top and bottom endsthe stops do not shift or come off
Lockingrelease the pull and pull the two tapes apartthe slider stays in place
Crosswise strengthpull a closed zip sideways by handthe teeth do not separate
Open endinsert the pin into the box many timeseasy and secure insertion
Colourcompare with the fabric in daylighttape and teeth match
Washing and ironinga sewn prototype according to the care labelno colour bleeding, deformation or melting

If the sample is for a garment with a coated slider, for example antique or black, also check that the coating does not rub off after friction.

The specification – a common language with the zip manufacturer

Most misunderstandings come from an incomplete order. A clear specification contains:

  1. zip type and size number (for example nylon coil No. 5 or metal No. 8);
  2. type of end – closed-end, open-ended or two-way;
  3. length and method of measurement – usually from the top of the slider to the bottom of the chain;
  4. colour of the tape and teeth – a shade card code, Pantone or a sample;
  5. slider – locking or non-locking, pull shape, finish, logo;
  6. special features – water-repellent coating, two-way opening, reverse coil;
  7. quantity per length and colour.

If you are unsure about any field, describe the product and how it will be used – the technical team will suggest the right option.

Documents and certificates

Brands selling in the EU are increasingly asked for documents on material safety. Ask for current certificates right at the start. Polkom offers an OEKO-TEX® certificate for all products and, if you need recycled materials, versions with GRS certification on request. You will find details on the Certificates page.

Zip brands: YKK and SAB

Besides zips with your logo on the slider, many brands also look for established names for certain collections:

  • YKK zips – the Japanese brand is a standard in many segments. Polkom offers original YKK zips; YKK is a third-party brand and is not made by Polkom.
  • SAB – a zip brand for which Polkom is the official distributor for the Balkans. SAB zips are suitable for series production of clothing, bags and home textiles.

The choice between a branded and a customised zip depends on the positioning of the product, your customer's requirements and the budget. A collection often combines both: a branded zip on the main fastening and a zip with a logo on the slider for pockets and accessories. The only important thing is that all zips in the product are compatible in size number, colour and finish so that the garment looks coherent.

Which zip type for which product

  • metal zips – jeans, jackets, leather goods and bags;
  • nylon coil zips – dresses, trousers, hoodies, wash bags and home textiles;
  • moulded-tooth zips – sports jackets, backpacks and workwear;
  • invisible zips – dresses, skirts and covers where the zip should not show.

How to compare quotes from several manufacturers

When you have two or three quotes, compare them on the same basis. The price of a zip without a specified slider, end type and colour says little. Put the quotes in a table and check:

  • whether they are all for the same type, size number and length;
  • which slider is included – locking or non-locking, with which finish;
  • whether the colour is standard from a card or a special dye;
  • what the minimum quantities per colour and per length are;
  • how fast samples are sent and whether the sample comes from series production;
  • how the order is packed – by length, by colour, with a label on each pack.

It is also worth assessing the communication: how quickly you get an answer to a technical question and whether the partner suggests a better option when it sees a risk in the specification. In series production this support is often worth more than a small difference in price.

Common mistakes when choosing

  • approval from a photo, without a physical sample;
  • stating a length without the method of measurement;
  • choosing a non-locking slider for a product worn under tension;
  • a colour of "black" or "navy" without a code or sample;
  • testing only a new zip, without washing and ironing a sewn prototype.

Zips from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, footwear and bags from Sofia with over 30 years of experience. Our range of zips includes metal, nylon coil, moulded-tooth and invisible designs, sliders and zip pullers with a logo, original YKK and SAB zips. Minimum quantities depend on the article. Send the specification or a description of the product via the contact page and we will prepare samples and a quote for you.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Can I order zips with a logo on the slider?
Yes. The logo can be embossed, engraved or enamelled on the slider pull, and the shape of the pull can also be made to your design. For this we need a vector file of the logo, the zip type and size number, and the desired finish. Minimum quantities and set-up costs depend on the design, so send a request for a quote.
Can I mix zips of different lengths in one order?
Yes, this is common in series production with different garment sizes. State the quantities per length and colour in one table, and for each item specify the size number, the type of end and the slider. For some products it is more practical to use continuous zip by the metre with separate sliders that are fitted in the workshop.
What should I do if the zip colour does not fully match the fabric?
Send a piece of the fabric or a Pantone code and ask for a sample in the closest colour. Compare in daylight, because artificial lighting changes the shade. If the standard shade card does not offer an exact match, the tape can be dyed to a sample for larger quantities. The minimum quantity for a special colour depends on the zip type.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.