Concealed Snap Buttons – Models S54-30 and S54-35, Sizes and Uses

Polkom · 6 min read
Concealed Snap Buttons – Models S54-30 and S54-35, Sizes and Uses

Concealed snap buttons are spring snaps whose cap stays inside the fabric and cannot be seen from the top – the garment fastens with a click, but the face side stays smooth, without a metal bump. In the Polkom catalogue there are two models from the 54 system: S54-30 “54 with concealed cap” in sizes 10, 11, 12, 14 and 16 mm and S54-35 “Mini 54 with concealed cap” in 9 mm. They are used on shirts, workwear, jackets, trench coats, knitwear and bodysuits, when the closure needs to be functional but unnoticeable.

What concealed snap buttons are

The classic 54-system snap button has 4 parts: the cap, the female part (socket) with the spring, the male part (stud) and the bottom part (post with a tube). On the standard model S54-10 the cap is the visible detail – metal, flat or coin-style, often with an embossed logo. In the concealed version the mechanism is the same, but the cap is designed to stay inside the fabric. So only the fabric is visible from the top, and the snap works like a regular 54 system – with the same soft but secure click.

This matters when the design does not call for a metal accent. A clean shirt placket, a smooth workwear front or a trench coat with a minimalist silhouette look calmer when the closure does not break up the surface.

Concealed snap button S54-30 from the 54 system – the cap stays inside the fabric
S54-30 – 54 system with concealed cap, sizes 10–16 mm

Concealed snap buttons: sizes and models

The two models cover different fabric weights and garment sizes. The table shows the catalogue data, and each code links directly to the model.

CodeModelSizes (mm)MaterialLogoUses
S54-3054 with concealed cap10; 11; 12; 14; 16brassnoshirts, workwear, jackets, trench coats, knitwear
S54-35Mini 54 with concealed cap9brassnofine shirts, bodysuits, knitwear
S54-1054 standard (visible cap, for comparison)11.5 – 30brassyesshirts, bodysuits, denim shirts, baby and children’s clothing
S54-20Mini 54 (visible cap, for comparison)9; 10; 11; 12brassyesshirts, bodysuits, baby clothing, fine fabrics

Both concealed models belong to the 54 system, which is designed for thin and medium-weight fabrics, denim shirts and poplin. The spring systems in the catalogue meet the minimum requirements of a 90 N pull test and a 15 N fastening force held for 10 seconds.

S54-30 – the all-round concealed model

S54-30 is the choice for most garments. The five sizes allow a smaller snap for a shirt and a larger one for a jacket or trench coat, where the closure has to take more strain. The model is also available with a patterned cap – an option that is useful when the cap can still be seen from the inside or on an open placket.

S54-35 – the mini version for fine fabrics

S54-35 is 9 mm in size and is intended for fine shirts, bodysuits and knitwear. Because the cap is concealed, the model is usually made without a finish. If you want all the metal accessories on the garment in one tone, or the garment is for a market with material requirements, a finish can be ordered on request – for example nickel colour or black nickel colour, both nickel free.

Mini concealed snap button S54-35, 9 mm, for fine shirts and bodysuits
S54-35 – mini 54 with concealed cap, 9 mm

When to choose a concealed instead of a visible cap

A concealed snap button is neither better nor worse than a visible one – it solves a different problem. Choose it when:

  • the design is minimalist – a smooth placket with no metal accents on the face side;
  • the garment is workwear – a metal cap can catch and scratch surfaces;
  • the snap sits under a flap or in a double placket – a visible cap would be an unnecessary cost;
  • knitwear needs to look soft – with no hard detail that can be felt on top;
  • the snap is functional, not decorative – for example an inner closure on a lining, pocket or adjustment strap.

A visible cap is more suitable when the snap is part of the look – western shirts, denim, children’s clothes with colourful details – or when you want the brand logo on it.

Logos on concealed snap buttons

According to the catalogue, models S54-30 and S54-35 come without a logo – the logical consequence of the cap not being visible. If branding is important, there are two practical options:

  • a concealed snap on the placket and visible logo snaps where they serve as an accent – cuffs, pockets, collar; S54-10, S54-20 or PR-30 with a flat coin-style cap are suitable for this;
  • branding through other elements of the garment – a woven label, a leather label or a metal logo plate.

The techniques for putting a logo on caps – embossed on metal, laser-engraved on mother-of-pearl and marble, printed on plastic – are described on the branding page.

Snap button S54-10 with a visible metal cap from the 54 system – the logo alternative
S54-10 – the visible cap takes an embossed logo

Which garments they suit

The catalogue lists specific uses, and in practice they group as follows:

  • Shirts and fine shirts – S54-35 for very thin fabrics, S54-30 in 10–12 mm for standard shirts.
  • Bodysuits and knitwear – a soft closure with no hard detail on top; on stretch fabrics the area is reinforced with interfacing or tape.
  • Workwear – S54-30 in the larger sizes for plackets and pockets.
  • Jackets and trench coats – S54-30 in 14 or 16 mm, when a clean face side is wanted on light fabrics.

For dense fabrics such as denim, wool, oilcloth and leather, the 54 system is not the best choice. There the 61 system or the special systems are recommended. If the garment is delicate or multi-layered and you do not want to use a press, take a look at sew-on snap fasteners.

Setting the concealed models

Concealed snap buttons are set like all spring systems – with special dies on a hand press, a lever press or on motorised and automatic machines, using the matching die for each size. A few rules are especially important for the concealed version:

  1. The setting area must be of even thickness – with no seam under the snap.
  2. The fabric is held taut during setting, otherwise it gathers around the cap.
  3. On knitwear, the area is reinforced with interfacing or tape.
  4. The female and male parts are always from the same system – a concealed cap from the 54 system is not combined with parts from the 61 system.
  5. A test setting on the actual fabric is essential before the production run.

If you are not sure which thickness the chosen size can handle, send us a fabric sample. We will do a test setting and recommend the model and the press setting.

Finish and colour

Even though the cap is concealed, the other parts are visible on the reverse side, and the male part when the garment is unfastened. That is why the finish matters. We offer the finishes from our colour chart: nickel, black nickel, antique brass, tin oxide, gold, gunmetal and unplated. Nickel, antique brass and tin oxide are standard in stock; the others are made to order. All finishes are nickel free – nickel and black nickel are only colour names – which is important for children’s clothing and the EU market.

Inquiry for concealed snap buttons

Polkom is a manufacturer of accessories for fashion, furniture, footwear and bags with over 30 years of experience. Send us a description of the garment, the type of fabric and the size you want via the contact form – we will recommend S54-30 or S54-35, do a test setting and send a quote. Price, minimum quantity and lead time on request. All systems and models are in the snap buttons category.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What is a concealed snap button?
It is a spring snap button from the 54 system whose cap stays inside the fabric and is not visible on the face side. It fastens with the same click as a standard snap, but the garment stays smooth on top. In the Polkom catalogue these are models S54-30 and mini S54-35.
What sizes do concealed snap buttons come in?
Model S54-30 is available in 10, 11, 12, 14 and 16 mm, and the mini model S54-35 in 9 mm. The smaller sizes are for shirts, bodysuits and knitwear, while 14 and 16 mm are for jackets, trench coats and workwear.
Can a concealed snap button have a logo?
No. The models with a concealed cap come without a logo, because the cap is not visible. If branding is important, combine concealed snaps on the placket with visible logo snaps on the pockets or cuffs, for example S54-10, S54-20 or PR-30.
Are concealed snaps suitable for a denim jacket?
For dense denim, wool or leather, the 54 system is not the best choice. The 61 system or the special systems are recommended there. The concealed S54-30 is suitable for light jackets and trench coats made of thin and medium-weight fabrics.
Is a finish needed if the cap is concealed?
The mini model S54-35 is usually made without a finish. However, the other parts are visible on the reverse side and when unfastened, so a finish can be ordered on request. All our finishes are nickel free and suitable for children’s clothing and the EU market.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.