Custom Urea Buttons – Colour Match to Fabric and Logo Options

Polkom · 4 min read
Custom Urea Buttons – Colour Match to Fabric and Logo Options

Custom urea buttons are produced in a colour matched to your fabric sample or Pantone reference and can feature a logo – either laser engraved or embossed in relief. Since urea is coloured throughout the material, the colour is uniform inside the button and does not fade with washing, ironing, or dry cleaning. The process includes colour approval, prototype buttons, and final approval before mass production.

Why urea is ideal for custom colour buttons

With urea, pigment is mixed into the powder before pressing. The result is a button coloured throughout its volume, not just on the surface. This offers several advantages:

  • scratches do not reveal a different colour underneath;
  • colour does not fade from friction during wear;
  • no coating that can peel off during dry cleaning;
  • matte or satin finish looks consistent from all sides.

By comparison, many fashion buttons achieve colour by painting or lacquer coating, which wears off over time at the edges.

Custom urea buttons – how colour is matched

Fabric sample

The most accurate method. Send a piece of the actual fabric at least palm-sized, preferably from the same batch that will be sewn. Fabric colour can vary between batches and under different lighting, so the sample must be representative.

Pantone reference

Convenient when fabric is not yet available or for corporate colours. Provide the code and system (e.g. Pantone TCX for textiles). Note that a solid, dense material like urea may look slightly different than fabric in the same code – so prototype buttons are mandatory.

Sample button

If you have a button you want to replicate in colour and shape, send the physical button. Photos are insufficient as screens display colours differently.

Metamerism: why colour “shifts” under different lighting

The button and fabric may look identical in daylight but different under store fluorescent lighting. This phenomenon is called metamerism and is due to different pigments and materials. To reduce it:

  • compare prototype buttons with fabric under several lighting types;
  • specify in your inquiry under which lighting the colour will be evaluated;
  • for dark colours (navy, black, burgundy), choose a tone slightly darker rather than lighter than the fabric.

Logo on urea buttons

MethodAppearanceWhen suitable
Laser engravingIndented logo with slight tonal contrastSmall to medium runs, complex logos, text
Embossed from dieRaised or recessed logo pressed into the buttonLarge and repetitive runs
Engraving with colour fillLogo in contrasting colour inside the indentationWhen logo must be visible from a distance

See more examples of customised buttons in the engraved buttons category.

How to prepare your logo

  • send a vector file (AI, EPS, PDF or SVG);
  • simplify the logo – thin lines under about 0.5 mm and small text will be lost;
  • consider placement – centred or around the edge, between holes or on a shank button’s full surface;
  • specify the sizes of all buttons to receive the logo – scaling differs for 18L versus 32L.

Order process

  1. Inquiry – model or sketch, size in lignes, hole count, colour, logo, finish, quantity and garment use.
  2. Offer – after details are clarified.
  3. Prototype buttons – we produce colour and logo samples for approval.
  4. Approval – you check samples with fabric, and we adjust if needed.
  5. Mass production and delivery – according to the approved sample.

Minimum quantities depend on the article – please send an inquiry. Price depends on size, model, colour complexity, logo method and quantity.

One colour, several sizes

A garment usually uses buttons in two or three sizes – for example, 18L for cuffs and 28L for jacket front. Order all sizes in one colour at once and approve them together. The reason is practical: larger buttons are thicker and let less light through, so with the same recipe they may appear slightly darker than smaller ones. Seeing samples side by side on fabric helps decide if fine correction is needed.

Corporate colours

For uniforms and corporate wear, button colour often must match the logo rather than the fabric. Clearly specify which is the reference – fabric or corporate palette – to avoid ambiguity at approval.

Finishes for urea buttons

  • Matte – the most typical, classic look;
  • Satin – soft shine, more elegant for jackets and shirts;
  • Polished edge with matte centre – highlights the shape;
  • Marble, stone, horn effects – for coats and classic menswear.

For classic menswear collections see also the selected men’s buttons, and the full range of materials in the urea buttons category.

Common mistakes when ordering colour matched buttons

  • approving colour from a photo instead of a physical sample;
  • fabric sample from a different batch;
  • too complex logo for small diameter;
  • ordering different sizes at different times causing shade differences;
  • no preserved reference for future orders.

Custom urea buttons by Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags based in Sofia with over 30 years of experience. We produce urea buttons colour matched to your fabric and with logos, provide fast prototype buttons and deliver across the EU. Send your fabric sample and logo via the contact page.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can buttons be made in the colour of my fabric?
Yes. Send us a piece of the actual fabric, preferably from the batch you will sew, or a Pantone code. We produce prototype buttons in that colour and send them for approval. Compare them with your fabric under daylight and artificial light. Mass production starts after you confirm the sample.
What logo file is needed for engraving buttons?
A vector file in AI, EPS, PDF or SVG format is best. Low-resolution raster images produce inaccurate outlines. Simplify the logo if it has very thin lines or small text, as these do not read well on buttons 15–20 mm in diameter. Also specify the sizes of the buttons.
How durable is the engraved logo on urea buttons?
The engraved logo is recessed into the material itself, and urea is coloured throughout, so the logo does not wear off with washing, ironing or dry cleaning. For colour-filled engraving, the coloured fill may wear over time with heavy use, so tone engraving is often chosen for workwear.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.