Contents
Drop handles for furniture consist of a fixed base – a rose or a backplate – and a moving part that hangs down when not in use: a ring, a drop or a semicircular bail. The choice is made on three criteria: the style of the furniture, the type of base and the fitting method with one or two screws. A correctly fitted drop handle does not rattle and does not scratch the front.
Drop handles for furniture – main shapes
- Ring pull – a round or oval ring hung from a single-hole rose. A classic for chests of drawers and bedside tables.
- Drop pull – a small teardrop-shaped pendant, easy to hold with two fingers; for small drawers and doors.
- Bail pull (semicircle) – a handle that drops down between two points; usually with two holes and set hole centres.
- Chest handle – a solid bail or bracket for chests, blanket boxes and trunks that get lifted.
- Handle with a decorative backplate – the bail or drop is mounted on a larger ornamented plate.
Base: rose or backplate
The base determines both the look and the function of the handle. A round rose is compact and fits at a single point. A backplate is larger and covers a wider area of the front – useful when you need to hide marks left by old handles or protect the lacquer from finger contact.
| Base | Holes | When to choose it |
|---|---|---|
| Small rose | 1 | rings and drops on small fronts |
| Two roses | 2 | bail pulls on drawers |
| Single backplate | 1 or 2 | classic chests of drawers, restoration, protecting the front |
Styles and finishes
Classic
Antique brass, bronze and antique copper with ornamented roses suit sideboards, chests of drawers and English-style furniture. Relief stands out best with these finishes, because the recesses stay darker.
Vintage and Provençal
Drops and small rings in an aged finish on light painted fronts. Here the shape is simpler, and the finish creates the sense of age.
Boho
Larger-diameter rings, sometimes combined with rattan, wickerwork or natural wood. Matt gold and bronze sit naturally next to these materials.
Modern matt
Smooth, unornamented rings and bails in black, anthracite or matt gold on lacquer or veneer. A drop handle in this style brings a soft contrast to a minimalist interior.
All Polkom metal drop handles are nickel free, and the finish is identical on every piece in the order.
Handle size relative to the front
A drop handle should be in proportion to the drawer. A small drop on the wide drawer of a chest looks lost, while a large ring on a spice cabinet door is heavy and impractical. The ring diameter is a guide: smaller rings for bedside tables and small drawers, larger ones for chests of drawers and wardrobes. Also check the distance to the worktop or the next drawer – the ring must not rest against it when it hangs down.
Fitting with one or two screws
Single-hole drop handles fit like a knob – with an M4 screw from the inside of the front, or with a stud and nut. Here it is important that the rose does not turn: some models have a small locating pin that goes into a shallow hole, or a square base beneath the rose.
Two-hole handles have hole centres, just like fixed handles. On bail pulls, 64, 96 and 128 mm are the most common. If you are replacing old handles, measure the distance between the old holes centre to centre – the new handle must match, otherwise new holes will be needed and the old ones will remain visible. In that case a larger backplate that covers them helps. For more on the standard sizes of fixed models, see the furniture handles category.
Screw length
It is chosen as the front thickness plus the thread depth in the base – roughly 6–10 mm. Old solid-wood furniture often has fronts thicker than the standard 18–19 mm, so measure them before ordering.
How to avoid rattling and scratches
The moving part is an advantage, but also a potential problem – every time the drawer closes, the ring strikes the front.
- A pad behind the ring – a small clear felt or silicone bumper where the ring touches the front stops the noise and protects the lacquer.
- The right ring size – an overly heavy ring strikes harder; on small drawers choose a lighter drop.
- Tightening with no play – a loose rose lets the whole handle move and rattle.
- A backplate instead of a rose – on lacquered and painted fronts the backplate takes the impact of the ring.
- Checking free movement – the ring must drop freely without sticking in the eye of the base.
Where they are used
- Chests of drawers – two rings or bails on the wide drawers and one drop on the small ones.
- Cabinets and sideboards – a ring or drop on the doors, often in a series with the drawer handles.
- Wardrobes – larger rings or bails that are gripped with the whole hand.
- Hotel furniture – identical handles across entire projects; quiet closing and a durable finish matter especially here.
- Chests and blanket boxes – side chest handles that carry the weight when moved.
If a piece also has small doors that do not call for a hanging detail, combine the drop handles with cabinet knobs in the same finish. You will find new models and series in the article Furniture Handles 2026 – Collection and Catalogue.
Drop handles from the manufacturer
Polkom is a manufacturer of drop handles for furniture with its own production in Sofia – standard models and handles to your design or copied from an old handle, with an engraved logo on the rose. The minimum quantity is usually 1000 pcs per model, the sample depends on the model, and production takes 10–20 days after approval. Send a photo, dimensions, finish and your logo (preferably a vector PDF) through a request for a quote.
Share this article














