Contents
Gold buttons for blazers are first chosen by tone – light, yellow, old or satin gold – and only then by model. Bright polished gold suits dark blue and black fabrics with smooth surfaces, old gold complements tweed, camel and earthy tones, while satin gold fits minimalist collections. The tone should match all other metal accessories on the garment, and the finish must be protected with a lacquer to prevent darkening during wear.
Gold Buttons for Blazers: Gold Tones Explained
“Gold” on buttons is a galvanic coating over brass or zinc alloy, not solid precious metal. The shade depends on the coating composition, subsequent treatment and lacquer. The main types are:
| Tone | Appearance | Suitable For |
|---|---|---|
| Light Gold | Cool, slightly lemony, polished | White and pastel blazers, summer collections, linen |
| Yellow Gold | Classic, warm, mirror shine | Dark blue blazers, black coats, uniforms |
| Old Gold (Antique) | Darkened recesses, light edges | Tweed, wool, camel, brown and green tones |
| Satin (Brushed) Gold | Matte, soft, no glare | Minimalist and contemporary styles |
| Rose Gold | Warm, coppery hue | Women’s styles, powdery and grey tones |
Learn more about finishes and combinations on the Colours and Finishes page.
Choosing the Tone According to Fabric
- Smooth and dense fabrics (gabardine, cashmere, wool crepe) tolerate polished shine well due to their calm surface.
- Textured fabrics (tweed, boucle, herringbone) look better with old gold – the button’s relief “dialogues” with the texture.
- Dark colours enhance contrast: even a small button on dark blue fabric is a strong accent.
- Light colours soften gold; on white or beige, satin gold looks more luxurious than polished.
- Seasonality matters: summer collections usually feature lighter tones, autumn ones warmer and antique.
The most reliable method is practical: place three samples with different tones on the fabric under daylight and store lighting. Differences invisible in photos become clear in person.
Gold Buttons for Coats
Coat buttons are larger (usually 36–44L) and heavier, so metal choice is also technical. Zinc alloy allows massive shapes and deep relief but weighs more; stamped brass is lighter and suitable for finer wool fabrics. Double-breasted coats often feature gold buttons with engraved motifs or logos, and the finish must withstand friction from bag straps and sleeves.
Shirt gold buttons are a separate case – small, flat, often with an enamelled centre. Their finish must be especially durable due to frequent washing at higher temperatures.
Metal Buttons for Blazers and Coats: Quantity and Sizes
The number and size of gold buttons follow the cut, but gold highlights every proportional flaw. Guidelines:
- Single-breasted blazer – two or three buttons on the front, usually 28–32L, and three or four on sleeves in 22–24L.
- Double-breasted blazer and blazer jacket – six buttons on the front, some decorative, plus sleeve buttons.
- Coat – four to eight buttons sized 36–44L depending on model, often with one smaller internal button.
- Women’s blazer – one to three buttons, one or two sizes smaller than men’s.
The more gold buttons the garment has, the calmer the tone should be – old or satin gold does not overwhelm double-breasted styles like mirror shine.
Matching with Other Metal Accessories
A blazer may have buttons, metal pocket zips, belt buckles and metal labels. Even slight tone differences make the garment look pieced together. When ordering:
- Set one reference tone and record it in the tech pack.
- Order all metal accessories in the same tone and, if possible, from one manufacturer.
- Approve samples together, not separately.
- Keep the approved sample as a standard for future batches.
For zips in the same tone, see metal zips.
How to Protect the Gold Finish
The gold finish lasts for years if properly applied and protected. Main risks are:
- Friction. Edges and relief wear first. Protective lacquer slows this down.
- Sweat and perfume. Their salts and alcohol can darken surfaces, especially on sleeves.
- Chemical cleaning. Most quality finishes tolerate it, but some ateliers cover buttons with foil during cleaning for expensive models.
- Ironing. Hot irons can damage lacquer; iron around buttons or through cloth.
- Storage. Damp blazers in plastic covers cause stains. Let garments dry before storing.
All Polkom metal buttons are nickel free, suitable for sensitive skin, and the tone is approved by sample before production.
Models and Customisation
Besides classic smooth and relief models, gold buttons can feature logos, monograms, crests or perimeter inscriptions. Engraving highlights logos with contrast between polished and matte areas, and enamel adds brand colour. See options in engraved buttons, and the full metal button range in metal buttons for blazers and coats.
Polkom – Manufacturer of Metal Buttons
Polkom is a manufacturer of accessories for fashion, footwear and bags, perfumes and cosmetics, packaging and furniture accessories, based in Sofia with over 30 years of experience. We produce gold buttons for blazers and coats in various gold tones, with logos and custom designs. All products have OEKO-TEX® certification, and metal parts are nickel free. Send us your fabric or a photo of the model via the contact form and we will prepare samples in several tones.
Share this article














