Contents
Hook and eye tape is a textile tape in which the hooks and eyes are embedded or stitched at equal intervals. It is used mainly in lingerie – the back closure of a bra, corsets, bodysuits and shapewear – because it is machine-sewn in one go and gives an even, adjustable closure. The choice depends on the number of hooks, the number of rows of eyes and the softness of the backing.
Types of hook and eye tape
Bra closure
This is the most common type. It consists of two short pieces:
- the hook piece – one, two, three or more hooks one above the other, embedded in a soft, usually brushed tape;
- the eye piece – several columns of eyes (most often three), which allow the bra to be fastened at different widths.
The configuration is described as the number of hooks by the number of columns, for example 1×3, 2×3 or 3×3. The more hooks, the wider the closure and the better it distributes the load – which is why larger bra sizes have three or four hooks.
Continuous hook tape for corsets
Corsets, bustiers and bodysuits use a long tape in which the hooks are placed at equal intervals along the whole length, while the matching tape carries the eyes. It is cut to the required length and sewn along the edge of the opening. In this way the closure runs along the entire front or back of the garment.
Bra extender
An extender is a short piece with hooks on one side and eyes on the other. It is hooked between the two parts of the closure and increases the back circumference. It is used for comfort, during pregnancy or when a bra feels tight. To work, its configuration must match that of the bra – a 2×3 extender does not fit a 3×3 closure.
How to choose hook and eye tape
| Garment | Type of tape | What to check |
|---|---|---|
| Bra in small sizes | 1×3 or 2×3 closure | Softness of the backing |
| Bra in large sizes | 3×3 closure or more | Width and strength |
| Sports bra | Wide closure | Resistance to washing and sweat |
| Corset, bustier | Continuous tape | Spacing between the hooks |
| Bodysuit, shapewear | Continuous or short tape | Flatness, so it does not show through |
Tape backing
The tape is in direct contact with the skin, so softness is decisive. A brushed knitted backing (with a soft pile) on the inside is usually used. Also check that the tape does not shrink in the wash and that its colour stays fast. For lingerie dyed in many colours, look for a backing that can be combined with the elastics and lace in the collection.
Hooks
The hooks are made of thin metal wire, often with a lacquer or powder coating in the colour of the tape, so that they are not visible and do not touch the skin directly. They should be flat, without sharp edges, and should not bend when fastened.
How the tape is sewn on
- Prepare the edges of the bra back – they are usually finished with elastic or binding.
- Place the edge of the garment between the two layers of the tape if it is folded, or lay it on the inside.
- Sew with a straight or zigzag stitch along the hooks without the needle hitting them.
- Secure the ends with a cross stitch or bartack so they do not come undone.
- Fasten and check that the hooks sit exactly opposite the first column of eyes.
With continuous corset tape, make sure the hooks and eyes are aligned along the whole length – a misalignment of a few millimetres will distort the edge.
Washing and durability
Lingerie is washed often, so the hook tape must last at least as long as the garment itself. Here is what to watch for when choosing the tape and writing the care instructions:
- the coating of the hooks – if the coating is damaged, the metal can darken and stain a light-coloured backing;
- shrinkage of the backing – if the tape shrinks more than the fabric, the closure starts to pull and pucker;
- snagging other garments – open hooks catch lace and jersey in the washing machine.
On the care label, recommend washing in a mesh bag with the hooks fastened. This protects the closure from deforming and other garments from laddered stitches. When testing a new style, wash several samples together with the main fabric and compare the dimensions before and after washing.
Single hooks or tape?
Single hooks and eyes are sewn on by hand and are suitable for dresses, blouses and skirts – where one or two sets are needed. Tape is the solution for lingerie and for places where there are many hooks that must be exactly the same distance apart. In serial lingerie production, tape saves a considerable amount of time.
You will find single sets in different sizes and colours in the wire hooks and eyes category.
Common mistakes
- A stiff backing that chafes the skin on the back.
- A closure with too few hooks for a large size – it bends and comes undone.
- Different configurations on the closure and the extender.
- Tape that shrinks differently from the main fabric in the wash.
Inquiry to Polkom
Polkom is a manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience, including haberdashery for lingerie. If you are looking for hook and eye tape, specify the garment, the configuration (number of hooks and columns of eyes), the width, the colour and the approximate quantity. Send an inquiry via the contact form – we will check availability and offer samples. Minimum quantities depend on the article.
Share this article














