Imitation Horn Buttons with Logo – Engraving and Relief for Your Brand

Polkom · 4 min read
Imitation Horn Buttons with Logo – Engraving and Relief for Your Brand

Imitation horn buttons with a logo are made in two main ways: laser engraving on a finished button or a relief logo cast into the mould for a new style. Laser gives a recessed, matte outline that has more contrast on light tones, while relief creates a three-dimensional mark with a smooth surface. For more contrast, the grooves of the engraving can be filled with colour.

Why imitation horn buttons with logo

Imitation horn (faux horn) is one of the most rewarding materials for branding. It has the classic, warm look of horn that suits jackets, coats and waistcoats, and as polyester it allows identical engraving on every button in the batch. A logo on a horn-effect button looks discreet and refined – like a signature, not an advertisement. That is why such buttons are chosen by brands that want a classic look with a recognisable detail.

Methods for a logo on imitation horn

Laser engraving

The laser removes a thin layer from the surface of the button. On imitation horn, the engraved area becomes matte and lighter than the glossy surface, so the logo appears as a light, fine outline. The method requires no tooling, allows fine details and is suitable for stock styles. See more about the technique in engraved buttons.

Relief in the casting

When producing a new style, the logo can be built into the mould so that every button comes out with a raised or recessed logo. The relief has depth and after polishing looks very natural, as if carved into the material. The method requires a mould to be made and suits larger runs.

Engraving with colour fill

The grooves of the laser engraving are filled with paint – most often gold, dark brown, black or white. This makes the logo stand out clearly even on dark horn. The colour is agreed on a sample.

How the logo looks on different tones

Button toneLaser without colour fillRecommendation
Light honey, creamfine outline, moderate contrastsuitable for a dark fill if you want a clear mark
Caramel, medium brownlight matte outline, clearly visiblea very good balance without additional colouring
Dark brownlight outline, visible at an anglegold or beige fill for more contrast
Black horngrey matte outline, discreetsuitable for tone-on-tone; for contrast, a light fill

The veining of the horn makes the background uneven. That is why the logo should be simpler and bolder than on a single-colour button – otherwise thin lines get lost in the pattern.

Where to place the logo

  • In the centre of a shank button – the whole face is free; the best place for a mark or monogram.
  • Around the rim of a button with holes – the logo or brand name is arranged in a circle around the recessed centre.
  • Above and below the holes – a compromise on flat four-hole buttons.
  • On the back – a hidden detail that underlines attention to quality.

Logo size relative to the button

Button sizeDiameter (mm)Suitable logo
20L–24L12.7–15.2mark, initials
28L–32L17.8–20.3mark or short name
36L–44L22.9–27.9full logo, lettering around the edge

On a jacket with two button sizes, the full logo is usually used on the front and only the mark on the sleeves.

What to prepare

  1. The logo in vector format (AI, EPS, PDF, SVG), single-colour, with fonts converted to outlines.
  2. The chosen style and size, or a description of the garment the buttons are for.
  3. The horn tone and, if you wish, the fill colour.
  4. The logo position – centre, rim, around the holes, back.
  5. The quantity per size.

Engraving or relief: how to choose

  • Laser – when you are ordering a stock style, have a smaller run, want a fast sample or plan different logos for separate collections.
  • Relief – when you are developing your own button style, the quantity is large and the logo is a permanent element of the brand.

With both methods, the logo is part of the material and does not wear off in washing and dry cleaning. If the grooves are colour-filled, the colourfastness is checked on a sample.

What to check on the sample

  • whether the logo can be read among the horn veining from the usual distance;
  • whether the contrast is the same on buttons with a lighter and a darker pattern;
  • whether the logo is centred and does not overlap the holes or rim;
  • whether the colour fill is clean, without smudges outside the grooves;
  • how the button looks on the fabric in daylight.

Combining with other branded accessories

Logo buttons often go together with woven labels, leather patches and metal logo plates. Garments with horn-look buttons naturally pair with leather labels in brown tones and woven labels in a shade matching the horn. When all the details carry the same mark, the collection looks coherent. If you are looking for single-colour buttons for branding, see also polyester buttons, which give the logo stronger contrast.

Batches and repeat orders

Imitation horn has its own pattern in each batch. That is why, if you are planning logo buttons for several seasons, keep the approved sample as a reference and order larger quantities at once. With laser engraving the file and settings are kept, and with relief the mould remains for subsequent orders.

Imitation horn buttons with logo from Polkom

Polkom is a Sofia-based manufacturer of accessories for fashion, furniture, footwear and bags, with over 30 years of experience. We engrave logos on imitation horn buttons (faux horn buttons) and make styles with a relief logo to order. We produce samples for approval and deliver throughout the EU. Send an inquiry with your logo, style and quantity.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Is the engraving visible on imitation horn buttons?
Yes. The laser mattes and lightens the engraved area, so the logo appears as a light outline on the glossy surface. It is clearest on medium brown and caramel tones. On very light or black horn the contrast is weaker and the logo looks discreet. For a stronger effect, the grooves can be filled with colour.
Can the logo be in relief on an imitation horn button?
Yes, when a new style is produced, the logo is built into the mould and every button comes out with a raised or recessed logo. After polishing, the relief looks natural. The method requires a mould to be made, so it suits larger runs and brands that will use the style long term.
What logo size suits a jacket button?
For the front buttons of a jacket, around 28L–32L, the logo can take up about half of the free area – a mark or a short name. For the sleeve buttons, around 20L–24L, use only the mark or initials. The horn veining makes the background uneven, so the logo should be simpler and bolder.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.