Sew-On Snap Fasteners – Sizes and When to Choose Them

Polkom · 4 min read
Sew-On Snap Fasteners – Sizes and When to Choose Them

Sew-on snap fasteners consist of two parts – female and male – with holes through which they are sewn on by hand or by machine, without a press and without piercing the fabric. Sew-on snap fasteners are available in sizes from 8 to 30 mm in brass and from 16 to 28 mm in zinc alloy. They are used on coats, jackets, dresses and bags, on delicate and multi-layered materials and wherever the snap should not be visible from the outside.

Sew-on snap fasteners: sizes and models

CodeModelMaterialSizesApplicationFeatures
SW-10Sew-on brassbrass8; 10; 12; 15; 17; 19; 21; 23; 25; 28; 30 mmcoats, jackets, denim jackets, trench coats, dresses, outerwear, bagsSewn on by hand or by machine; finish of your choice.
SW-20Sew-on zinc alloyzinc alloy16; 20; 25; 28 mmcoats, jackets, outerwear, bagsMore massive and heavier – for large styles.

SW-10 is the classic brass sew-on snap with eleven sizes and a finish of your choice from the finish card. SW-20 is made of zinc alloy – more massive and heavier, for large coat styles, outerwear and bags. Both models have no logo, as the snap is hidden between the layers.

The magnetic snap also belongs to the sew-on options: besides the press-on model SP-70, it is also offered as a sew-on magnetic snap in 12, 14 and 18 mm.

When to sew on instead of pressing

The sew-on snap is not the “weaker” version, but a different solution. Choose it when:

  • the snap must be invisible – a concealed closure on a coat, a wrap dress overlap, an inner flap on a bag;
  • the fabric is delicate – silk, chiffon, lace, loosely woven wool fabrics, where piercing or prongs would leave a mark;
  • the area is multi-layered – a thick stack with lining and wadding, through which a press-on snap passes with difficulty;
  • there is no access with a die – narrow corners, already sewn products, repairs;
  • the run is small or atelier-scale and there is no press and no dies for the size in question.

Conversely, for shirts, bodysuits, denim and workwear, where a visible cap, speed in series production and a logo are wanted, the better choice is a press-on system such as the 54 system or the 61 system.

Sew-on or press-on – a comparison

CriterionSew-on snapPress-on snap
Parts2: female and male part with holes4 parts (6 for double-sided)
Attachmentby hand or by machinehand press, lever press, motorised or automatic machine with a die
Piercing the fabricnowith prongs – no; with a tubular or nail base – yes
Visibility from outsidenot visible from the right sidethe cap is visible (except the concealed cap)
Logonoon most models – yes
Suitable fabricsall, including delicate and multi-layereddepending on the system – from jersey to leather

How to choose the size

With a sew-on snap, the size determines both the holding force and visibility through the fabric. Guidelines:

  1. 8 – 12 mm – dresses, blouses, wrap overlaps, light items;
  2. 15 – 19 mm – jackets, cardigans, pocket flaps, cases;
  3. 21 – 30 mm – coats, heavy wool fabrics, bags and large flaps; if a more massive snap is needed – SW-20 in 20 – 28 mm.

On thin light fabric, a small snap is preferable, because a larger one may show through. On a heavy coat, a snap that is too small comes undone under the weight of the fabric.

How to sew on a snap fastener

  1. Mark the position of the two parts – the male part is usually on the inside of the upper (overlapping) layer, and the female part on the right side of the lower layer.
  2. Use a strong polyester thread in the colour of the fabric, and a double thread for heavy items.
  3. Make 4 – 6 stitches through each hole, passing only through the upper layers if the snap must be invisible from the outside.
  4. Secure the thread with a few small stitches under the snap, not with a knot on the right side.
  5. Check the fastening – the two parts must line up exactly, without distorting the fabric.

In series production, sew-on snaps can also be attached by machine, with a button-sewing machine fitted with a suitable holder.

Reinforcement and durability

  • On soft and thin fabrics, add interfacing or a small piece of fabric on the wrong side.
  • On bags and heavy coats, sew through a reinforcing tape, not just through the lining.
  • Do not sew on the very edge of the fabric – leave at least a few millimetres.
  • If the snap is close to the skin, the finish must be nickel free – as all our finishes are.

Washing and ironing

Brass and zinc alloy sew-on snaps tolerate normal washing, but the item is best washed fastened so that the holes do not catch on other garments. When ironing, do not place the iron directly on the snap – iron around it or through a cloth on the wrong side. If the thread wears through, the snap is easily sewn back on, with no tool needed.

Logo and coordination

The SW-10 and SW-20 sew-on models have no logo. If you want the brand to be visible, combine them with visible logo buttons on the right side – for example metal buttons or snap buttons with a cap. You will find the branding options on the branding page. For concealed closures, also see the sew-on snap fasteners category.

Inquiry

Polkom offers sew-on snap fasteners in brass and zinc alloy in a finish of your choice. Send us the type of product and fabric via the contact page – we will suggest a size and a sample. You will find all systems in the snap buttons category, and the sew-on models in the sew-on section.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Which is stronger – a sew-on or a press-on snap?
When correctly attached, a press-on snap from the 61 system holds more firmly under heavy tension, which is why it is preferred for jacket plackets and workwear. A sew-on snap is strong enough for coats, dresses, flaps and bags, especially in a larger size and sewn through a reinforcing tape. The key is to choose a size suited to the weight of the fabric.
What thread is used to sew on snap fasteners?
A strong polyester sewing thread in the colour of the fabric is the most suitable. For heavy coats, bags and large snaps, use a double thread or a heavier count. Cotton thread is weaker and can wear through at the edge of the holes over time, so it is avoided for outerwear.
Can a sew-on snap fastener have a logo?
The brass and zinc alloy sew-on models have no logo, as they usually remain hidden between the layers. If you want the brand to be visible, place visible buttons or snap buttons with a logo cap on the right side, and use the sew-on snaps for the concealed closures.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.