Textile Labels with Logo – How to Prepare Your Design

Polkom · 4 min read
Textile Labels with Logo – How to Prepare Your Design

For textile labels with a logo, it is best to send the logo as a vector file (AI, EPS, PDF, or SVG), indicating Pantone colours and the desired label size. If you only have PNG or JPG, it should be high resolution. Fine details and text must be large enough for the chosen technology – printing allows finer details than weaving.

Why the label logo looks different from the screen

Textile is not paper. The threads of the tape and the structure of satin or taffeta “absorb” some details. In woven labels, the image is made of threads, similar to pixels, while in printing the ink slightly spreads on the fibres. That is why a logo that looks good on a business card sometimes needs to be simplified for a label. This is not a compromise of the brand but an adaptation to the material.

Files for textile labels with logo

  • Vector (AI, EPS, PDF, SVG) – ideal option. Lines remain sharp at any scale, and colours can be separated.
  • Raster (PNG, JPG) – acceptable if high resolution and clear contrast. A blurred logo will need to be redrawn, which takes time.
  • Fonts – convert text to outlines or send the font to avoid substitution.
  • Colours – specify Pantone codes or send a physical fabric sample if the label must match the fabric tone.

Minimum size for text and lines

The exact limits depend on the machine and material, but the general rule is simple: the smaller the detail, the more suitable printing is compared to weaving.

ElementPrinting on satin/taffetaWeaving
Very small text (composition, address)SuitableRisk of merging
Thin lines and outlinesGoodNeed to be thickened
Shading and gradientsLimited, depends on methodNot recommended
Relief and textureFlat resultExcellent relief
Large number of coloursLimited numberLimited number of threads

If the logo contains a thin slogan below the main sign, consider omitting it on small labels and leaving it only on hang tags, where there is more space.

How many colours can a label have

For printed textile labels, usually one to a few colours are used on a coloured base. Each additional colour complicates preparation, so a single-colour logo on a contrasting tape is the most economical and legible solution. For woven labels, colours depend on the number of threads in warp and weft. Details about weaving technology can be found in woven labels.

Label size and clear space around the logo

The logo should not touch the edge. Leave at least 2–3 mm free space from cut edges and 3–5 mm from sewn edges. For a center-folded label, the logo should be in the upper visible half, while the lower half remains in the seam or is used for other information. If the label is for the neck, choose a width that does not show above the neckline.

Colour selection

  1. Choose the tape colour – white, black, natural, or custom colour.
  2. Choose the logo colour with sufficient contrast. A grey logo on beige tape is rarely legible.
  3. Consider the fabric – a dark label on a white thin T-shirt is visible from the front.
  4. For a multi-colour collection, you can have one label for all items or versions in 2–3 base colours.

How the process works

After receiving the logo and requirements, we prepare a real-size mock-up. You approve it, then we produce a sample for you to see and feel. Only after sample approval does serial production begin. At this stage, it is easiest to adjust colour, size, or line thickness.

Mistakes that increase cost and delay

  • Sending a logo cut from a website with low resolution.
  • Lack of Pantone or physical colour sample.
  • Too much information in a small area.
  • Unspecified sewing method – logo ends up under the seam.
  • Final design changed after sample approval.

Logo versions for different labels

Most brands have several logo versions – full (symbol and name), symbol only, and text only. This is very useful for textile labels. The full version looks good on larger labels for jackets and coats. Text only suits narrow neck labels on T-shirts. Symbol only can be used on small flag labels in side seams or hems. If you don’t have such versions yet, ask your designer to prepare them before ordering labels.

Negative and positive

A logo can be printed dark on a light tape or light on a dark tape. The negative version (light logo on black or dark blue tape) often looks more luxurious but requires slightly thicker lines because light details visually thin out. The positive version is more legible for small text.

Additional information next to the logo

Next to the logo, you can add a website, social media profile, “Made in Bulgaria” text, or a short slogan. Add only what truly helps the customer. Each line reduces logo size and makes the label busier. Composition and care information is better left on a separate care label.

Order textile labels with logo from Polkom

Polkom manufactures custom textile labels with your brand logo – on satin, taffeta, cotton, or woven labels, in size and colour of your choice. We assist with logo adaptation, produce samples before serial orders, and deliver across the EU. Send your logo file and a brief product description via Contact.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can I order textile labels with logo if I don’t have a vector file?
Yes, if the raster image is high resolution with clear outlines. If needed, the logo can be redrawn as vector, but this requires extra time and your approval to confirm the shape is preserved exactly. Always ask your designer first for the original AI, EPS, PDF, or SVG file.
Which is better for a logo – printed or woven textile label?
Woven labels provide relief, a more luxurious look, and almost no fading, so they are preferred for the main brand label. Printed labels are thinner, softer, and convey finer details and small text. Many brands combine both – woven neck label with logo and printed care label in the side seam.
Can the label colour match the fabric exactly?
Colour is selected by Pantone code or physical fabric sample. Exact match is not always achievable because tape and fabric are made of different fibres and reflect light differently. You approve a sample before production and can request tone adjustment.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.