Contents
Fittings for upholstered furniture are all the small metal, plastic and textile parts a factory adds to the frame and upholstery: legs, mechanisms, connectors, upholstery buttons for deep buttoning, decorative nails, zips for covers, threads and brand plates. Some of these small fittings for furniture carry the load, some make the piece functional, and the rest define its style. This article is an overview for manufacturers of sofas, armchairs and upholstered beds – what you need and how to plan it for an entire collection.
Upholstered furniture fittings by function
It helps to divide the parts into four groups. That way nothing is forgotten when a new model is developed, and in the order it is clear which item depends on which.
| Group | Parts | What they solve |
|---|---|---|
| Load-bearing | legs, glides, centre supports | stability, height, silhouette |
| Functional | sofa bed, lift and swivel mechanisms | sofa bed, storage base, swivel armchair |
| Structural | connectors, sectional sofa connectors | assembly, transport, modular sofas |
| Upholstery and decorative | buttons, nails, zips, threads, plates | appearance, maintenance, brand recognition |
Legs for sofas and armchairs
Legs set the seat height and the silhouette of the piece: tall slim legs make a sofa look lighter, low glides "set" it on the floor. Corner and modular sofas need centre supports under the middle of the frame in addition to the visible legs. The choice of material – metal, aluminium, plastic or wood – depends on the style and the load. You will find a detailed comparison of heights and shapes in the article Sofa and Armchair Legs – Height, Shape and Style, and the range in the category sofa and armchair legs.
Mechanisms
The mechanism decides whether the sofa is also a bed, whether the armchair swivels and whether the bed headboard hides a storage base. It is chosen early in the project, because it determines the dimensions of the frame and the space for the cushions. The main types – sofa bed mechanisms, gas lift bed mechanisms, swivel bases and armrest mechanisms – are collected in the category furniture mechanisms.
Connectors
Modular and corner sofas are shipped in parts and assembled on site. The metal connectors between the modules must hold the sections tightly against each other, with no gap and no creaking. Frames that can be dismantled also use bolted joints with threaded inserts. It is wise to plan the connectors together with the legs, so that the fixing points under the frame do not clash.
Upholstery buttons for deep buttoning
Deep buttoning – tufting with buttons arranged in diamonds or squares – is the trademark of the Chesterfield and of many contemporary headboards. It uses fabric-covered buttons in the same fabric or leather as the upholstery. They have to withstand the strong pull of the twine and must not tear when someone sits down. More about how they are made in the article Fabric-Covered Buttons for Upholstery and Deep Buttoning.
Decorative nails and brand plates
A row of upholstery nails along the edge of the armrest outlines the shape of the armchair, while a metal plate with the brand name signs the piece – on the back, on a leg or on the side. These details look best in the same finish as the legs. The types of nails, rosettes and plates are in the category decorative furniture accessories.
Zips for covers and threads
Removable seat and cushion covers close with a zip that must be strong enough for frequent removal and washing and stay hidden in the seam. Upholstery uses heavier nylon coil zips, often continuous zips by the metre with separate sliders. How to choose the gauge and length is described in the article Zips for Upholstery and Furniture. The seams of upholstered furniture need a strong thread of suitable thickness, especially on leather and heavy upholstery fabrics.
Checklist for a sofa collection
When developing a new series – for example a two-seater and three-seater sofa, a corner module and an armchair – a short list by component helps:
- Legs – the same shape and finish for all models; the number of visible legs and centre supports for each model.
- Mechanisms – which models are sofa beds, which have a storage base, which armchair swivels.
- Connectors – module connectors and bolted joints for transport.
- Deep buttoning – size of the fabric-covered buttons and quantity per model.
- Nails – head diameter, finish and whether nail strip or individual nails will be used.
- Zips – length per cushion and seat, colour matched to the fabric.
- Threads – thickness and colour for visible decorative stitching.
- Brand plate – size, mounting position, type of logo.
- One finish – legs, nails, plate and visible parts of the mechanism in the same colour.
Why it is convenient to order everything from one manufacturer
- Matching colour – metal parts from one production line share the same finish, with no difference in shade between legs and nails.
- One sample for the series – the whole set of fittings is approved at once on the prototype.
- Synchronised delivery – the parts arrive together, and furniture production does not wait for a single missing item.
- One logo – the brand looks identical on the plate, the leg and the button.
Furniture accessories from the manufacturer
Polkom is a manufacturer of furniture accessories for upholstered furniture factories, with its own production in Sofia – from legs and mechanisms to decorative nails, fabric-covered buttons and brand plates. All metal parts are nickel free and can be made in one finish for the whole collection. The minimum quantity is usually 1000 pcs per model, samples depend on the product, and production takes 10–20 days after approval. Send your list of parts and your logo (preferably as a vector PDF) via a request for a quote and samples.
Share this article














