Wholesale Metal Buttons – How to Order from a Manufacturer

Polkom · 5 min read
Wholesale Metal Buttons – How to Order from a Manufacturer

Wholesale metal buttons are ordered fastest when the inquiry states the size in lignes or mm, the type of attachment, the material, the finish, the logo (if any), the quantity and the desired lead time. The manufacturer sends a quote, makes a sample for approval and, after written confirmation, starts the production run. Below you will find the full checklist and the steps that save time and prevent mistakes.

Stock button or made to order

The first decision is whether you need a standard style from stock or a button made to your own design.

  • Stock styles – ready shapes and finishes, available for faster delivery. Suitable for small and medium runs, for samples and for unbranded products.
  • Standard shape with personalisation – an existing style with a laser-engraved logo or a different finish. A good compromise between price, lead time and uniqueness.
  • A completely new style – your own shape, relief and logo, with a new die or casting mould. Suitable for brands that want a recognisable detail in every collection.

What to include in your inquiry for wholesale metal buttons

SpecificationExample
Type of garmentwomen's blazer, jeans, children's jacket
Size32L (20 mm) for the front, 24L (15 mm) for the sleeve
Attachmentshank, 2 or 4 holes, tack for jeans, removable with a split ring
Materialbrass, zinc alloy, aluminium
Finishantique brass, matte; black nickel colour, glossy (all finishes are nickel free)
Logovector file, technique – relief, engraving, enamel
Quantityper size, plus a reserve
Care methodmachine washing, industrial denim washing, dry cleaning
Lead time and addressdesired date, country of delivery

The more complete the inquiry, the more accurate the quote and the fewer rounds of clarification are needed.

The steps of the order

  1. Inquiry with the specifications above and reference photos or a physical sample.
  2. Quote with a description of the style, the technique and the terms.
  3. Drawing for made-to-order styles – to confirm the dimensions and the position of the logo.
  4. Sample in the actual finish. Try it on the fabric and check the buttonhole, the weight and the colour in daylight.
  5. Approval in writing. Keep one approved sample as the reference standard.
  6. Production and inspection – checking the size, the finish and the strength of the shank or neck.
  7. Delivery to your warehouse or directly to the sewing factory.

What affects the price of wholesale metal buttons

  • material and weight of the button;
  • the need for a new tool – a die or a casting mould;
  • complexity of the relief and number of operations;
  • type of finish – standard or with hand-applied antique effect, enamel, lacquer;
  • quantity per batch and frequency of orders;
  • packaging and labelling requirements.

A unit price is given after a request for a quote, because the combination of these factors is different for every style. Minimum quantities also depend on the article.

The sample – why it should not be skipped

A catalogue photo shows the shape, but not the weight, the exact tone of the finish or how the button behaves on a particular fabric. The same antique gold looks different next to navy wool and next to beige linen. The sample lets you check whether the button passes through the buttonhole without effort, whether the shank is high enough for the thickness of the edge, whether the weight pulls the front down and whether machine attachment runs smoothly. If the garment will be washed industrially, wash the sample together with a piece of the fabric. Every correction made at the sampling stage costs far less than a correction after serial production.

Packaging and marking

For large orders, specify how the buttons should be packed – by size, by style, by colour or by garment – and what labels the cartons should carry. If the buttons go directly to a sewing factory, it is convenient for the packaging to follow the production order. This saves time at goods-in and reduces the risk of mixing up sizes.

How to calculate the quantity you need

Count the buttons for one garment by size, multiply by the number of garments in the run and add a reserve for rejects during attachment and for spare buttons supplied with the garment. Across a range of garment sizes the number of buttons is usually the same, but it changes between different styles in the collection – make a separate table for each style.

How to check the delivered batch

  • Compare the colour with the approved reference under the same light.
  • Measure several buttons with a calliper – diameter and height.
  • Check that the shanks are firmly attached and do not bend.
  • For jeans buttons, do a trial attachment with your press and tacks.
  • Wash a trial garment in the way stated on the care label.

Common mistakes when ordering wholesale

  • Ordering only from a catalogue photo, without a physical sample.
  • No reserve – a shortage of a few buttons stops the whole run.
  • Different suppliers for buttons and metal details, which then do not match in tone.
  • An unspecified washing method, especially for denim with industrial treatment.
  • Unclear ownership and storage of the die for made-to-order styles.

Repeat orders

If the style is used over several seasons, plan repeat orders in good time. Give the article code and the date of the previous order and send the reference sample if possible. This way the manufacturer can reproduce the finish as accurately as possible. For made-to-order buttons with a die, a repeat order is usually faster and more economical because the tool already exists.

Choose a style from the metal buttons category, see the personalisation options in engraved buttons or browse all buttons.

Why order from Polkom

Polkom is a manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience. We offer more than 10,000 articles, large stock, production to the customer's design and logo, fast sampling and delivery across the EU. If needed, we also take care of attaching the buttons. Send your inquiry via the contact page, to info@polkom.com or on +359 876 76 60 50.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What is the minimum quantity for wholesale metal buttons?
The minimum quantity depends on the article. For stock styles it is usually lower, while for buttons made to your design with a new die it is determined by the technology and the finish. Send an inquiry with the style, the size and an approximate quantity and you will receive specific information together with the quote.
Can I get a sample before ordering?
Yes. For standard styles you can receive samples of the buttons in stock, and for made-to-order styles a sample is made in the actual finish after the drawing is approved. The sample is tried on the garment fabric, and the colour, weight and size relative to the buttonhole are checked. Serial production starts after written approval.
Do you deliver metal buttons outside Bulgaria?
Yes. Polkom delivers buttons and garment accessories across the European Union – to brand warehouses, sewing factories and ateliers. The terms and method of delivery are agreed in the quote according to the quantity, the destination and the desired lead time. State the country and the delivery address in your inquiry.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.