Woven Labels for Hats – Winter Caps, Baseball Caps and Beanies

Polkom · 3 min read
Woven Labels for Hats – Winter Caps, Baseball Caps and Beanies

Woven labels for hats are used in two main ways: as an internal brand label sewn into the back seam or sweatband, and as an external label that serves as a visible branding element on the front or side. For beanies, the most popular option is a small rectangular label folded in half and sewn into the cuff, while for baseball caps the label is placed on the back or side of the crown.

Woven Labels for Hats – Internal and External

Internal Label

The internal label carries the brand logo and sometimes the size. It is placed in the back seam of knitted hats or under the sweatband in baseball caps. Comfort is key here, as the label touches the skin on the forehead or nape. Soft damask or satin, small size, and edges finished with ultrasonic cutting or woven binding are recommended.

External Label

The external label is part of the hat’s design. On beanies, it is sewn onto the cuff at the front or side, while on baseball caps it is attached to the side of the crown, the back panel, or the adjustment strap. Different rules apply here: the label must be clearly visible, with strong contrast and securely sewn to avoid snagging.

Hat Types and Suitable Labels

HatLabelFoldPlacement
Beanie with cuffsmall damask, externalfolded in half or straight cutflag in cuff seam or sewn on front
Knitted hat without cuffsmall damaskfolded in halfinside back seam
Baseball capdamask or HDstraight cut or folded in halfside, back, or under sweatband
Bucket hatdamaskfolded in halfflag in brim seam
Children’s hatsatinfolded in halfinside seam

Label Size for Hats

Hats are small items, so the label must be proportionate. On beanie cuffs, the label is small and usually rectangular with a single-line logo. For baseball caps, side labels are compact, while back labels can be slightly larger. Before deciding on size, place a paper template of the actual size on the hat and photograph it to check proportions.

Flag in Seam

A popular solution is a label folded in half and sewn into the side seam of the cuff or brim so it sticks out like a small flag. The visible part is small, so the logo should have clear, bold elements.

Sewing the Label on a Hat

  • Knitted hats – the label is attached during sewing of the back seam or hand-sewn on the cuff with loose stitches to avoid puckering the knit.
  • Baseball caps – the external label is sewn around the panel perimeter before panels are joined; the internal label goes under the sweatband.
  • Threads – polyester, matching the label base colour.
  • Needles – ballpoint needles for knits, standard needles for dense fabrics.

Woven Label or Other Material

For hats, woven labels compete with embroidery, leather labels and metal plates. Each has its style:

  • Woven label – clean, detailed, lightweight; suitable for most knitted hats.
  • Leather or eco-leather label – heavier, vintage or outdoor style. See leather labels.
  • Metal plate – luxurious, durable accent. See metal plates.

Combination is also common: woven label inside and leather or metal element outside.

Label Design for Hats

  1. Use a simplified logo version – space is limited.
  2. Choose strong contrast – external labels are viewed from a distance.
  3. Consider the base colour relative to hat colours – one label should work across the range.
  4. If hats come in many colours, consider two label variants – light and dark.
  5. Laser cutting allows shaped labels – round or shield-shaped.

Washing and Wear

Hats are washed less often than clothes but are exposed to rain, snow, sun and sweat. Polyester woven labels withstand these conditions and do not fade quickly in sunlight. The internal label absorbs sweat, so a moisture-wicking material like polyester is recommended. If the hat is wool and hand-washed, the label will not shrink, but if the hat shrinks, a smaller label causes fewer issues.

Common Mistakes

  • Label too large on the cuff, visually “heavy”.
  • Small text on external label, unreadable from a distance.
  • Hard edge on internal label, irritating the forehead.
  • Label sewn across the entire cuff, hindering folding.

Hat Size Label

Most knitted hats are one size fits all, but baseball caps and children’s hats often have sizes. The size can be woven on the internal label or on a separate small label next to it. For one size fits all, some brands print “One size” directly on the brand label to avoid a second label.

Woven Labels for Hats by Polkom

Polkom manufactures woven labels in small sizes, with folding and cutting, suitable for hats, according to your design. As a manufacturer with over 30 years of experience, we also offer leather labels and metal plates for combination. Send an inquiry with your hat type and logo.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Where is the label placed on a hat?
The internal brand label is placed in the back seam of knitted hats or under the sweatband in baseball caps. The external label is a branding element sewn on the beanie cuff front or side, and on baseball caps on the crown side or back panel. Both are often used simultaneously.
What size label is used for beanies?
Beanies use a small label proportional to the cuff, usually rectangular with a single-line logo. If the label is a flag folded in half and sewn into the seam, the visible part is even smaller. It’s best to cut a paper template in actual size, place it on the hat and assess proportions before ordering.
Woven or leather label for a winter hat?
Woven labels are lighter, more detailed and suit most knitted hats, including fine knits. Leather labels give a heavier, vintage or outdoor look and suit coarse knits. The choice depends on the brand style. Many manufacturers combine a woven label inside with a leather one outside.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.