Contents
Custom printed metal plates carry the logo as a colour print on a smooth metal surface rather than as relief or engraving. The most widely used methods are UV printing for full-colour logos and gradients, and screen printing for one- and two-colour logos in an exact Pantone shade. Printing is the best choice when the logo has many colours or fine transitions that metal and enamel cannot reproduce.
When printed metal plates are a better fit than engraving or embossing
The three techniques each solve a different task. Embossing and engraving work with the shape of the metal, while printing works with colour. Here is a neutral comparison:
| Criterion | Print (UV or screen) | Engraving | Relief (cast or stamped plate) |
|---|---|---|---|
| Colours | full colour, gradients, photos | the colour of the metal and its plating | the colour of the metal, enamel optional |
| Fine detail | very good, including small text | very good for single-colour lines | depends on the mould and the depth |
| Rub resistance | good, higher with a protective coating | very high | very high |
| Feel to the touch | smooth surface | slightly recessed | raised, tactile |
| Typical use | colourful brands, children's and sports collections, furniture, packaging | numbered series, fine lettering | denim, leather goods, bags |
If the logo is single-colour and the plate sits in a spot with constant friction, engraving or relief is usually the more logical option. You will find more about engraving in the article metal plates for engraving.
UV printing on metal
In UV printing, the ink is applied by a digital head and cured instantly under ultraviolet light. No stencils or screens are needed, so the method is convenient for multicolour logos, colour fades and even photographic images. On dark or mirror-finish metal, a white underlay is printed first so the colours look clean; without it they blend with the metal tone and turn darker. Placing the white layer under only part of the logo creates an interesting effect: some elements appear in colour, while others let the metal shine through.
Screen printing on metal
Screen printing applies the ink through a screen, one colour at a time. The print is denser and more saturated than a digital one, and the colour can be matched precisely to Pantone. The method suits one- and two-colour logos, lettering in a corporate colour and longer runs in which the same plate repeats without changes.
Protective coating over the print
The print is a thin layer on the metal, so on plates for clothing and bags a clear lacquer or a clear epoxy dome is often applied on top. The dome makes the surface slightly convex, adds depth to the colours and guards the print against scratches. We have covered the differences between soft enamel, hard enamel and epoxy coating separately in the article metal plate with enamel, so here we only note that with printed plates a clear coating is the surest way to extend the life of the logo.
Plate materials
All Polkom metal products are nickel free. The choice of metal affects the weight, the look and how well the print adheres:
- Aluminium – light and suitable for larger plates. Anodised aluminium can carry its own colour, with the print applied on top as a second colour.
- Stainless steel – stable and moisture-resistant, ideal for workwear, outdoor products and furniture.
- Brass – warm in tone and pleasantly heavy, preferred for premium accessories; it can be plated in gold, antique brass or a nickel-look finish (nickel free).
- Zinc alloy – cast plates with shape and relief, where the print can be combined with raised elements.
The finish beneath the print is also part of the design. Matt and brushed surfaces reduce glare and give the colours a calmer look, while a mirror finish heightens the contrast between printed and unprinted areas.
Durability in washing and wear
A printed plate copes well with everyday use if its position is chosen sensibly. On a bag flap, a piece of furniture or packaging the print is protected; on the back pocket of jeans or on a belt that rubs against a seat, the strain is greater. Plates for garments that go through industrial laundering, enzyme washing or stone washing should be tested under real conditions. Ask for samples and run them with the garment through the same wash cycle – this shows whether a protective coating is needed. It also pays to check rub fastness: rub the sample with a wet and a dry white cloth and see whether any colour transfers. For furniture and suitcases, where the plate is cleaned with detergents, test the product the end customer will actually use as well.
How to prepare your artwork
- Send the logo in any format; a vector PDF is the most convenient.
- For screen printing, state the Pantone for each colour; for UV printing, say whether the colours must match a specific Pantone or your brand book.
- Mark which elements are white, which are transparent and where the metal should stay visible.
- Add the size and shape of the plate, the metal, the finish and the attachment method – sew-on holes, prongs or rivets.
Printed metal plates direct from the manufacturer
Polkom is a manufacturer of metal logo plates and metal accessories, with its own production in Sofia and over 30 years of experience. We prepare a technical drawing and a sample, and the run starts 10–20 days after approval. The minimum quantity is usually 1000 pcs per design. Our products carry OEKO-TEX® certification. Send your logo and the plate specifications via the contact page and we will recommend the right method.
Share this article














