Ribbon Printing – Heat Transfer, Screen Printing, Sublimation and Foil

Polkom · 5 min read
Ribbon Printing – Heat Transfer, Screen Printing, Sublimation and Foil

Ribbon printing means applying a logo, text or pattern to satin, grosgrain, cotton or organza ribbon. The four main methods are screen printing for solid one- and two-colour logos, heat transfer for multicolour images, sublimation for polyester ribbons with gradients, and hot foil for a gold or silver shine. The right choice depends on the ribbon material, the number of colours and whether the ribbon will be washed.

How to choose a ribbon printing method

Before comparing techniques, answer four questions. The answers almost always narrow the choice down to one or two methods:

  1. What is the ribbon made of? Polyester takes every method, including sublimation. Cotton is not suited to sublimation, but takes screen printing well.
  2. How many colours does the logo have? One or two solid colours are a typical job for screen printing. Gradients, photos and many shades call for heat transfer or sublimation.
  3. Will the ribbon be washed? The bow on a gift box never goes through a washing machine, but a hanger loop in a garment collar does so dozens of times.
  4. What hand feel do you expect? Some methods leave a slight layer on the ribbon, while others change only the colour of the fibre.

The four main methods

Screen printing

The ink is pressed through a fine mesh screen with open areas in the shape of the logo. A separate screen is made for each colour, so the method is most economical for one or two colours and longer runs. Screen printing gives a rich, solid, slightly raised print that stays contrasting even on a dark ribbon. It suits satin, grosgrain and cotton.

Heat transfer

The design is first printed onto a carrier film and then transferred to the ribbon with heat and pressure. This reproduces multicolour logos, fine transitions and small details without separate preparation for each colour. The print is a thin layer on the surface – it is worth checking on a sample that the ribbon stays flexible enough to tie a bow.

Sublimation

In sublimation, the dye turns into gas under heat and penetrates the polyester fibre. The print forms no layer: the ribbon keeps its softness and sheen, and the colours do not rub off because they are part of the fibre itself. The method works only on polyester and best on light ribbons – a white or cream base gives the cleanest colours.

Hot foil (gold, silver)

Metallic foil is transferred with a heated die and leaves a mirror-like gold, silver or coloured metallic print. The effect is luxurious and is used mainly in packaging for cosmetics, perfumes, jewellery and confectionery. Foil is sensitive to heavy rubbing and washing, so it is better suited to ribbons that are not washed.

MethodSuitable ribbonsColoursWash durabilityTypical use
Screen printingsatin, grosgrain, cotton1–3 solid coloursgood with proper curingpackaging, medals, hanger loops
Heat transfersatin, grosgrainmulticolour print, gradientsgood, checked on a samplemulticolour logos, promotional ribbons
Sublimationpolyester only, light baseunlimited, photo qualityvery good – the colour is in the fibremedal ribbons, lingerie, textiles
Hot foilsatin, grosgraingold, silver, metallic toneslimited – for ribbons that are not washedluxury packaging and gifts

Which ribbon for which print

The smooth surface of satin ribbon gives the sharpest and most contrasting print, which is why it is the most common base for packaging prints. Ribbed grosgrain ribbon is matt and stable; on it, the finest lines follow the ribs slightly, so thin fonts are enlarged by a point or two. Cotton ribbon and herringbone tape give a natural look and suit eco packaging and cotton bags. Organza is translucent and takes print, but the logo looks lighter and more delicate.

Ribbon width and logo size

The logo should leave a free margin to the ribbon edges – usually at least one or two millimetres on each side, because the woven edge is not perfectly straight and print close to it looks inaccurate. A narrow 6–10 mm ribbon fits a short text or symbol; for a full brand name with a slogan, a ribbon of 15–25 mm and up is more practical. When the logo repeats, define the repeat pitch – the distance between two prints. For a box bow, the pitch is set according to where the logo will fall once the bow is tied.

Durability in washing and use

Durability depends not only on the method but on the combination of ribbon, ink and curing. If the ribbon goes into a product that is washed – a hanger loop, piping, a tape in lingerie or children's clothing – ask for a sample, wash it at the temperature on the care label and then iron it. Compare the colour with an unwashed sample and check whether the print has cracked along the fold. For packaging, resistance to rubbing and light matters more, especially if the ribbon stays in a shop window for a long time.

Where printed ribbon is used

  • bows on gift boxes, bags and cosmetic sets;
  • collar hanger loops and piping with the brand name;
  • tapes in lingerie, swimwear and sportswear;
  • ribbons for medals, lanyards and events;
  • wedding and celebration ribbons with a message and date.

If you are working out how much ribbon you need for packaging, see also the article how many metres of logo ribbon to order.

How to supply the artwork

  • Format: we accept logos in any format, but vector PDF is the most convenient – text converted to outlines, with no embedded low-resolution images.
  • Colours: state a Pantone for each print colour and the ribbon colour from the shade card.
  • Size: give the logo height in millimetres and the ribbon width.
  • Lines: avoid extremely thin lines and very small text – on a textile base they lose clarity.
  • Use: describe where the ribbon will be used so that we can suggest a suitable method.

Ribbon printing direct from the manufacturer

Polkom is a manufacturer of accessories for fashion, footwear and bags, for perfumes and cosmetics, packaging and furniture, with its own production in Sofia and over 30 years of experience. We make printed ribbon with logo to your design and in the colour you choose. Before the run you receive a visual and, if needed, a sample; production starts 10–20 days after approval. Our products carry the OEKO-TEX® certificate, and recycled versions are available on inquiry. Send your logo, ribbon width and colour through the contact page.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Which ribbon print lasts longest?
On polyester ribbon, sublimation lasts longest, because the dye penetrates the fibre and forms no layer that could rub off. On cotton ribbon and for solid one-colour logos, screen printing with proper curing gives a very good result. Hot foil is the most sensitive to washing and rubbing and is best suited to ribbons used in packaging.
Can gold be printed on satin ribbon?
Yes. A gold effect is achieved with hot foil, which gives a mirror shine, or with screen printing in metallic ink, which is more matt. Foil is preferred for luxury packaging, while metallic ink stands up better to rubbing. The safest way is to compare both options on a sample in the chosen ribbon colour.
How many colours can a logo have in ribbon printing?
Screen printing usually works with one to three solid colours, because each colour needs its own screen. With heat transfer and sublimation the number of colours is practically unlimited – gradients and photographic images can be printed. For a multicolour logo, state a Pantone for each main colour.
What file is needed to print a logo on ribbon?
You can send the logo in any format, but vector PDF with text converted to outlines is the most convenient. Add the Pantone numbers of the colours, the ribbon width and colour, and the desired logo height. If you only have a raster image, we will prepare it and send you a visual for approval.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.