Moulds for metal buttons with a logo – what they are, when you need one and how they work for repeat orders

Polkom · 3 min read
Moulds for metal buttons with a logo – what they are, when you need one and how they work for repeat orders

When a brand orders metal buttons with a raised logo, the first step in production is not the button itself but the tool it will be made with – a mould or a die. Many buyers hear about it for the first time in the quotation and wonder why it is needed, what exactly they get and what happens with the next order. In this article we answer these questions. Polkom is a manufacturer of metal buttons with a logo and makes the tooling for them in its own production.

What is a mould for metal buttons

A mould is a steel tool containing your button design together with the logo. Every button in the production run comes from it – identical down to the smallest detail. The type of tool depends on the technology:

TechnologyToolResult
Stamping from brass or steel sheetstamping diea light button with crisp relief, often in two parts
Die casting in zinc alloycasting moulda solid button with deep, multi-level relief and a free shape

The difference between the two methods is described in the article stamped or die-cast metal buttons.

When a mould is needed and when it is not

A mould is needed for

  • a raised or recessed logo that is part of the metal;
  • a completely new button shape – square, crest, monogram, figure;
  • a new size of an existing design.

No mould is needed for

  • laser engraving on a standard stock button – only a logo file is needed;
  • a standard stock design without a logo;
  • a change of finish only, or of the enamel colour on an existing design.

That is why, for small quantities and a first collection, laser engraving is often the easier start, while a raised logo with a mould pays off for larger and recurring runs. You will find more about this logic in the article logo buttons in small runs.

How production works

  1. Logo file – in vector format; thin lines and very small lettering are adapted to the button size.
  2. Technical drawing – size in lignes, profile, relief height, type of shank or holes.
  3. Drawing approval – before the tool is made.
  4. Making the mould – in our own production.
  5. Sample – the first buttons from the mould, in the chosen finish; the sample costs 50–100 €.
  6. Production run – 10–20 days after sample approval, minimum 1000 pcs per design.

We explain how to prepare your logo in the article preparing a logo for engraved buttons.

One mould – how many sizes?

Each button size usually needs its own tool, because the logo and relief are scaled and adjusted to the diameter. If a jacket needs 32L front buttons and 24L sleeve buttons with the same logo, that means two tools. If the design allows, the logo is adapted so that it looks the same on both sizes.

How to plan moulds for a whole collection

If the collection has several garments with logo buttons, think about the moulds together. Combine sizes wherever possible – for example the same 24L button for the jacket sleeves and the waistcoat. Choose a design that works in several sizes without losing detail. Plan the buttons for coats and trousers from the outset too, if they will be in the same style. That way the number of tools stays reasonable and all the buttons look like one family.

Repeat orders

The mould is a one-off investment. Once made, it serves all subsequent orders of the same design – it is not paid for again and no new sample has to be made from scratch. For a repeat order it is enough to state the design, size, finish and quantity. This makes raised logo buttons particularly cost-effective for brands with continuing designs, uniforms and corporate wear.

What can be changed without a new mould

  • Finish – gold, antique brass, silver, gun metal, black, nickel colour; all nickel free.
  • Surface – gloss, matt, satin, patina.
  • Enamel – different colours in the relief of the same logo.

So with one tool you can have several versions of the button for different lines of the collection. You will see examples of finishes in the article metal button finishes.

Frequent questions from brands

Can I use one mould for buttons and for another accessory?

No – buttons, snap fastener caps, plates and pullers have different constructions and each accessory has its own tool. The logo, however, can be used on all of them.

How long does the whole process take?

The lead time for the sample depends on the complexity of the design, and the production run is ready 10–20 days after sample approval.

We have collected the seven most common mistakes when ordering logo buttons in the article mistakes when ordering logo buttons.

Metal buttons with a logo from Polkom

Send us your logo in vector format, the sizes, the garment and the finish you want. We will suggest the technology – stamping, casting or laser – and prepare a drawing for approval. We deliver across Europe. Browse our engraved buttons and metal buttons.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Why is a mould needed for metal buttons with a logo?
A raised or recessed logo is part of the metal and comes from a tool made to your design – a stamping die or a casting mould.
Do I pay for the mould with every order?
No. The mould is a one-off investment and serves all subsequent orders of the same design.
Do I need a separate mould for each size?
Usually yes – each button size needs its own tool, because the logo and relief are adapted to the diameter.
Can I have a logo without a mould?
Yes, with laser engraving on a standard button. Only a logo file is needed.
What are the minimum quantity and lead time?
1000 pcs per design. The sample costs 50–100 €, and the production run is ready 10–20 days after sample approval.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.