Contents
Quality hooks and eyes are not judged by the catalogue photo but after the hundredth fastening: the hook keeps its shape, the edge of the fabric does not pull and the finish still looks new after washing. Hooks and eyes – also called hook and eye closures – are a small detail, but when one opens on a trouser waistband or a coat, the garment comes back from the customer. In this article we have gathered the criteria garment factories and ateliers use to assess a hook, and we present the models in the Polkom range – from the classic wire hook and eye to flat trouser hooks and bars and decorative fasteners.
If you are new to these fasteners, start with the article what wire hooks and eyes are.
What makes a hook and eye high quality
At first glance two hooks look the same. The difference lies in the material, the finishing and how precisely each batch is made. Here are the six signs experienced garment technologists check.
Wire of the right gauge with good spring-back
The wire must be thick enough for the load and have good spring-back – after a slight bend it should return to its original position instead of staying distorted. Wire that is too soft bends during sewing, while wire that is too hard can crack at the bends. A good wire hook is resilient, but not "rubbery".
A hook that does not open
The most common complaint is a hook that has opened: when the waistband is under tension, the curve straightens and the eye slips out. On quality hooks and eyes the hook is closed enough to hold the eye, and the bend is even, with no weak spots. On flat models the same job is done by a solid, well-formed hook tongue.
Smooth edges that do not cut fabric or thread
The wire ends and the edges of stamped parts must be rounded and free of burrs. A rough edge gradually cuts through the thread the hook is sewn on with, snags the fine yarns of silk and chiffon and wears through the lining.
A finish that survives washing
The finish must be even, with no stains or bare spots in the bends. With washing and ironing a poor finish darkens, flakes or leaves marks on the fabric. All Polkom metal finishes are nickel free – "nickel" in a description refers only to the colour, not the composition.
Even sewing holes
The loops of a wire hook and the holes of flat models must have a uniform shape and be smooth inside. That way the needle passes freely, the stitches sit tight and the hook does not twist on the fabric.
Consistent dimensions from batch to batch
In series production the hook and eye from a new order must fit exactly like the approved sample. Any deviation in size means a loose closure or an eye that will not engage. How to choose the size for the fabric is explained in our article on hook and eye sizes.
A quick sample test before ordering
Before you start a production run, test a few sets on the actual fabric:
- fasten and unfasten the hook many times and check that it keeps its shape;
- pull the fastened point by hand, the way a waistband is pulled when sitting down;
- run the part over a fine fabric and see whether it snags;
- wash the test piece together with the garment on the usual programme and compare the colour;
- sew on a few pieces and judge whether the needle passes easily through the holes.
Tips on the sewing itself can be found in the guide how to sew on a hook and eye.
Types of hooks and eyes in the Polkom range
The hooks and eyes collection includes models for different fabrics and loads. These are the main types.
Classic wire hook and eye
Bent wire with a curved hook and two sewing loops, supplied as a set with an eye. This is the most versatile hook and eye – for dresses, skirts, blouses and necklines, and as the hook above an invisible zip. Sewn on the inside, it remains almost invisible.


Eyes for hooks: straight and wavy
The eye matters just as much as the hook. A straight eye (bar) is used when the fabric edges overlap, while a wavy eye holds the hook in an exact position and stops the closure from sliding sideways. A round eye is for edges that meet edge to edge. In quality sets the eye is made of the same wire and has the same finish as the hook.

Flat trouser hooks
Flat models are cut from metal sheet and are much stiffer than wire ones. That is why they are used as trouser hooks and bars and on skirt waistbands, where tension is greatest. The double-hook model spreads the load over two points, and the models with square holes sew on firmly and do not twist. For waistband closures see also the trouser hooks and bars collection.


S-shaped hooks
On these models the hooks are curved in an S-shaped line that holds the eye securely while still allowing easy unfastening. They suit outerwear and garments where the fastener is visible and has to look good.

Decorative hooks and eyes
Decorative models with round holes are meant to be seen – along the edge of waistcoats, coats, fur and down garments, and on stage and historical costumes. For heavier garments see also the article on large hooks and eyes.

Ring and ball fastener
Instead of a hook, this fastener has a ball that slots into a ring. The connection is soft and flexible, so this model is practical for coats, capes and furs where the edges meet without overlapping.

Small flat models
Small flat hooks combine the stiffness of sheet metal with a discreet size. They suit necklines, collars, cuffs and light skirts, and in rose gold they also become a visible accent.
Where they are used – and where they are not
Hooks and eyes fasten trouser and skirt waistbands, coats, fur and down garments, necklines, bodices and bustiers with individually sewn hooks, as well as stage and historical costumes. For bras and bodysuits, however, single hooks are not suitable – these use hook and eye tape closures with several rows of eyes, which we cover in the article on hook and eye tape.
Colours and finishes – all nickel free
The colour of the hook is chosen according to the fabric and whether the fastener is hidden or visible:
- nickel colour – silver-toned, versatile for light and mid tones;
- black – almost invisible on dark fabrics;
- black nickel – a dark metallic tone with a slight sheen;
- matte silver – a silver tone without glare for discreet details;
- gunmetal – a dark grey metallic tone for grey, navy and denim;
- antique brass – an aged warm tone for outerwear and vintage collections;
- gold and light gold – for visible decorative fasteners and warm tones;
- rose gold – for womenswear collections and soft tones.
All Polkom metal finishes are nickel free. More on choosing the colour can be found in the article black, silver or gold hooks and eyes.
Custom hooks and eyes with a logo
Flat models offer enough surface for a logo or a custom shape. Polkom is a manufacturer and makes flat hooks to the customer's design – with an engraved or embossed logo and in the chosen finish colour. Options and minimum quantities depend on the article – send an inquiry with a description or sketch.
Table: which model for which garment
| Garment / fabric | Recommended model | Why |
|---|---|---|
| Trouser waistband | Flat double trouser hook | Stiff, takes strong tension |
| Skirt waistband, heavy fabrics | Flat hook with square holes | Firm sewing, does not twist |
| Dresses, blouses, hook above an invisible zip | Classic wire hook and eye | Fine and almost invisible |
| Necklines, collars, cuffs | Small flat model | Discreet size, secure closure |
| Coats, waistcoats, outerwear | S-shaped hook | Secure hold and good looks |
| Furs, capes, edges that do not overlap | Ring and ball | Soft, flexible connection |
| Visible details, stage costumes | Decorative hook and eye | Shape and colour are part of the design |
| Bras and bodysuits | Hook and eye tape | Adjusts the width in several rows |
Quality hooks and eyes from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags with over 30 years of experience. Hooks and eyes are available from stock in several colours, and for production orders we send samples so you can test the model on your fabric. For factories that buy regularly, the article on hooks and eyes wholesale is also useful. Browse the hooks and eyes gallery and send an inquiry with the model, colour and quantity.
Share this article













