Contents
A premium woven label is recognised by touch: it is soft, flexible, does not prick and is not felt on the neck. Softness comes from a combination of fine yarn, a satin or damask weave, the right density, a softening finish and soft edges. Ultrasonic cutting seals the edge with high-frequency vibration instead of a heated blade, so the edge stays thin and flexible. Add personalisation on top – logo, font, colours, a double-sided design, a jacquard background and the right fold – and you have soft woven labels that carry your brand properly.
What makes a woven label premium
The label is the first thing a customer touches when they turn the garment inside out. If it is stiff and scratchy, it often gets cut out – and the brand disappears with it. A premium label is not about one expensive material but about several right decisions taken together: which yarn and which weave, how the edge is finished, how it is folded and how well the design is adapted for weaving. If you are looking for custom woven labels for a brand that cares about feel, these decisions are made before the sample.

Soft woven labels – what softness depends on
The yarn
Finer yarn gives a thinner and more flexible ribbon. It also allows finer detail, because the logo is built from more, thinner threads. Thicker yarn makes the label denser and stronger, but also stiffer.
The weave: satin and damask
Satin has a smooth, slightly shiny face with long floating threads and is the softest to the touch. Damask is denser and allows finer detail, but with fine yarn it is also soft and pleasant. Taffeta is cheaper and stiffer, so it is rarely chosen for a premium neck label. You will find a detailed comparison in the article damask, satin or taffeta.
Weaving density
The denser the label is woven, the sharper the detail – but also the thicker the ribbon. A good label is a balance: dense enough for the font to be legible and thin enough to stay flexible. That is why density is set according to the design, not by a template.
Finishing
After weaving, the ribbon can go through a softening finish that relaxes the threads and makes the label softer from the very first wear. The back of the label also matters – with multicolour designs the floating threads on the back can be optimised – and, of course, so does the edge.


Ultrasonic cutting – how it works
In ultrasonic cutting the tool is not heated. It vibrates at high frequency, and the friction heats the synthetic threads only at the point of contact. The threads melt and fuse in a very narrow zone while the rest of the ribbon stays untouched. The result is a sealed edge that does not fray, yet is thin, smooth and flexible – without the hard melted strip a hot knife sometimes leaves behind.
Because the method works by melting, it suits the polyester yarns most labels are woven from. Ultrasonic cutting is used mainly for straight cuts, which makes it the natural choice for rectangular labels that touch the skin – at the neck, in underwear, in children's clothing.
Ultrasonic cutting versus the other methods
We have covered the four ways of finishing the edges in detail in the article woven label edges – laser, ultrasonic or woven edge. Here is just a short comparison from the point of view of a premium label:
| Method | Edge to the touch | Shape | When it suits |
|---|---|---|---|
| Ultrasonic cut | thin, soft, flexible | straight cuts | neck labels, underwear, children's clothing, any width |
| Laser cut | precise, stiffer | shaped cuts | external branding, labels following the logo outline |
| Hot knife | stiffer | straight cuts | labels that do not touch the skin |
| Woven edge | softest | rectangular, width depends on the loom | maximum comfort in standard widths |
In practice, ultrasonic cut labels come close to the comfort of a woven edge without its width limitation. That is why it is often the best solution for soft woven labels in a non-standard size. More practical comfort tips are in the article a label that does not scratch.
Folding – the finishing touch of a premium label
The fold hides the cut ends in the seam and determines how the label sits in the garment. The types are described in detail in the article on woven label folds; here is a quick overview:
| Fold | What it looks like | Where it is used |
|---|---|---|
| Straight cut | flat label without folding | sewn on all sides, side seam |
| End fold | both ends folded under at the back | neck of T-shirts, sweatshirts and shirts |
| Centre fold (loop fold) | label folded in half | side seam, double-sided labels |
| Mitre fold | ends folded at an angle | label sewn into a seam that sticks out like a tab |
Combining an ultrasonic cut with an end fold gives a label with no exposed edge left against the skin.

Personalising the woven label
Logo, font and minimum detail
With logo labels for clothing, the logo is converted into a weaving pattern in which every line is built from threads. That is why very thin lines and small text have a limit below which they become blurred. How small the font can be and how the logo is adapted is explained in the article on minimum font size and detail. The complete guide to ordering with a logo is in the article woven logo labels, and for very fine detail see HD woven labels.

Colours and matching the collection
The colours of the base and the logo are chosen from the available thread colours, and you can give a Pantone code as a reference. Because a woven colour is formed by interlacing threads, it looks slightly different from a printed colour – which is why the sample matters. Contrast is just as important: a light logo on a light base loses detail much faster than a dark logo on a light background.
Double-sided labels
A double-sided label has a design on both sides – for example a logo on the front and text or a symbol on the back. It is most often centre-folded so that both faces are visible when the label sticks out of the seam. It is an elegant way to fit in more information without making the label bigger.


Jacquard background and ornament
The background of the label does not have to be plain. With jacquard weaving, a fine ornament, a repeating motif or a floral element can be woven into the base, with the logo sitting on top. Such a label looks like a small piece of fabric and suits evening, boutique and gift collections. Silver or gold effects can also be achieved with metallic thread.

How an order works
- File. You send the logo in vector format (AI, PDF, SVG) or in high resolution, together with the desired sizes, colours, weave, cut and fold.
- Sample. We adapt the design for weaving and make a sample so you can see and feel the real label.
- Approval. You check the detail, colours, softness and edge – ideally sewn into a real garment and after washing. Corrections are made at this stage.
- Production. After approval the labels are woven in series, cut, folded and packed.
If you want to see the whole process up close, read how woven labels are made.
Premium woven labels from Polkom
Polkom is a manufacturer of woven labels with over 30 years of experience. We will help you choose the yarn, weave, cut and fold for the garment and adapt your logo so that it looks clean and stays soft to the touch. Send us your logo and we will prepare a proposal and a sample.
Share this article













